lift-master 65-32448 ユーザーズマニュアル

2.43"

1.24"

4.59"

Accessory
Tray

0.281" Dia.
(2 Holes)

Heater
Bracket

Heater

Instructions

1

Transformer 100VA with 3.2A fuse

1

Heater

1

Hardware bag

1

Line cord

4

PARTS LIST

Unpack kit to verify the parts listed below are included.

SELF-REGULATING

HEATER KITS

MODELS 65-32448 AND 65-32449

71-6532448 AND 71-6532449 (FACTORY INSTALLED)

SELF-REGULATING HEATER KITS

The heater kits are thermostatically controlled heaters that
should be installed in areas where the temperature drops
below freezing. To install:

1. Disconnect power to operator.

2. Locate two mounting holes in accessory tray on opposite

side of the drive chain (Figure 1).

3. Mount heater bracket to accessory tray.

4. Attach heater to bracket by sliding the heater’s fin

in-between the washer and bracket.

5. Make wire connections (see reverse).

6. Restore power to operator.

SL595 SELF-REGULATING HEATER KIT

The heater kit is a thermostatically controlled heater that
should be installed in areas where the temperature drops
below freezing. To install:

1. Disconnect power to operator.

2. Mount heater bracket to enclosure (Figure 2).

3. Attach heater to bracket by sliding the heater’s fin in

between the washer and bracket.

4. Make wire connections (see reverse).

5. Restore power to operator.

To prevent possible SERIOUS INJURY or DEATH from
electrocution or fire, disconnect electric power to

operator BEFORE installing.

Enclosure

1.75"

1.25"

5.25"

.281" Dia.
(2 Holes)

Heater

Heater
Bracket