lift-master hmj ユーザーズマニュアル
11
✳ Use SAE 30 Oil (Never use grease or
silicone spray).
✔ Repeat ALL procedures.
■ Do not lubricate motor. Motor bearings are
■ Do not lubricate motor. Motor bearings are
rated for continuous operation.
■ Do not lubricate clutch or V-belt.
■ Inspect and service whenever a malfunction is observed or suspected.
■ Inspect and service whenever a malfunction is observed or suspected.
Check at the intervals listed in the following chart.
HOW TO ORDER REPAIR PARTS
OUR LARGE SERVICE ORGANIZATION SPANS AMERICA
Installation and service information is available
CALL OUR TOLL FREE number:
1-800-528-2806
WHEN ORDERING REPAIR PARTS
PLEASE SUPPLY THE FOLLOWING INFORMATION:
PART NUMBER DESCRIPTION MODEL NUMBER
ADDRESS ORDER TO:
THE CHAMBERLAIN GROUP, INC.
Technical Support Center
6020 S. Country Club
Tucson, AZ 85706
EVERY
EVERY
EVERY
ITEM
PROCEDURE
3 MONTHS
6 MONTHS
12 MONTHS
Drive Chain
Check for excessive slack.
Check & adjust as required.
Lubricate.*
Check & adjust as required.
Lubricate.*
●
✔
Sprockets
Check set screw tightness
●
✔
Clutch
Check & adjust as required
●
✔
Belt
Check condition & tension
●
✔
Fasteners
Check & tighten as required
●
✔
Manual Disconnect
Check & Operate
●
✔
Bearings & Shafts
Check for wear & lubricate
●
✔
MAINTENANCE SCHEDULE
To avoid SERIOUS PERSONAL INJURY or DEATH from
electrocution, disconnect ALL electric power BEFORE
electrocution, disconnect ALL electric power BEFORE
performing ANY maintenance.
WARNING
CAUTION
WARNING
WARNING