Lowrance lmf-400 ユーザーズマニュアル
37
Section 4: EP Configuration &
Calibration
To configure items connected to the LowranceNET, press
MENU
, select
S
YSTEM
S
ETUP
and press
ENTER
. Highlight
B
US
D
EVICES
and press
ENTER
to
open the Bus Devices list. Bus Devices works as the device manager for
the bus, allowing you to configure and unconfigure devices and set and
reset critical values such as alarms and calibration.
NOTE:
NOTE:
The Suzuki Engine Interface, EP-35 Temperature sensor, EP-15
Fluid Level, EP-50 Storage Device and EP-10 Fuel Flow are the
only sensors that can be configured through the Bus Devices list.
Bus Devices highlighted in the System Setup menu (left). Searching
Bus Devices window (center) with Bus Devices list (right).
EP-35 Temperature Configuration
The EP-35 Temperature sensor has three configuration options: Inside,
Outisde and Water. An unconfigured temperature sensor will appear
on the bus devices list as UnCfg Temp.
To configure EP-35 Temp Sensor:
To configure EP-35 Temp Sensor:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Highlight
B
US
D
EVICES
and press
ENTER
. The Bus Devices list will
appear.
3. Select an unconfigured temp sensor (
3. Select an unconfigured temp sensor (
U
N
C
FG
T
EMP
) and press
ENTER
.
The following message will appear: Press Enter to Configure Temp
Sensor.
4. Press
Sensor.
4. Press
ENTER
, which will open the Sel Temp menu with three options:
Water Temp, Outside Temp and Inside Temp.
5. Highlight the desired option and press
5. Highlight the desired option and press
ENTER
. The temp is now
configured. You will be directed to the Bus Devices list. Press
EXIT
repeatedly to get back to the main display.