lawrence replacing a 2-way tensabarrier cassette ユーザーズマニュアル
TOOLS REQUIRED:
• Phillips head screwdriver
INSTRUCTIONS:
Step 1
Start by loosening the two screws. Do not
remove them.
Start by loosening the two screws. Do not
remove them.
Step 2
Release the 1 spline and grommet by pulling
outward. Then lift the old cassette out of the
post.
Release the 1 spline and grommet by pulling
outward. Then lift the old cassette out of the
post.
Step 3
Fit the new cassette into the post, aligning the
spline and grommet to the slots.
Fit the new cassette into the post, aligning the
spline and grommet to the slots.
Step 4
Press the cassette fully into post and tighten
the two screws.
Press the cassette fully into post and tighten
the two screws.
Cassette is now ready.
Replacing a Cassette
Step 1
Step 2
Step 4
Step 3
Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: 631.666.0336 • www.lawrencemetal.com
e-mail: service@lawrencemetal.com • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA