jetway 601tcfr3a ユーザーズマニュアル

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

setting its jumpers accordingly. Please refer to the documentation of your hard disk for 
the jumper settings. 

 

 

 

      

 

 

 
(10)  Secondary IDE Connector (40-pin block): IDE2 
 

This connector connects to the next set of Master and Slave hard disks.  Follow the 
same procedure described for the primary IDE connector.  You may also configure two 
hard disks to be both Masters using one ribbon cable on the primary IDE connector and 
another ribbon cable on the secondary IDE connector. 

 

 

    

 

 

•  Two hard disks can be connected to each connector.  The first HDD is referred to as the 

“Master” and the second HDD is referred to as the “Slave”. 

•  For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM 

drive on the same IDE channel as a hard disk.  Otherwise, the system performance on this 
channel may drop. 

This board has another serial port COM2, it come with cable providing serial 
port COM2.