lawrence replacing a cassette ユーザーズマニュアル
TOOLS REQUIRED:
• Phillips head screwdriver
INSTRUCTIONS:
Step 1
Start by loosening the four screws. Do not
remove them.
Start by loosening the four screws. Do not
remove them.
Step 2
Release the 4 splines by pulling outward.
Then lift the old cassette out of the post.
Release the 4 splines by pulling outward.
Then lift the old cassette out of the post.
Step 3
Fit the new cassette into the post, aligning the
4 splines to the slots.
Fit the new cassette into the post, aligning the
4 splines to the slots.
Step 4
Press the cassette fully into post and tighten
the four screws.
Press the cassette fully into post and tighten
the four screws.
Cassette is now ready to use.
Replacing a Cassette
Step 1
Step 2
Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: 631.666.0336 • www.lawrencemetal.com
e-mail: service@lawrencemetal.com • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA
Step 3
Step 4