lawrence post and beam assembly ユーザーズマニュアル

• Phillips head screwdriver and a 2.5mm Metric
Allen Wrench

Step 1
Dry fit Panel System together.  Positions should
be marked prior to drilling and fastening.

Step 2
Posts set in place

Step 3
Position Lower Beam

Step 4
Fasten Lower Beam in position using 2.5mm
Metric Allen Wrench

Step 5
Position Panel (May need 2 persons depending
on size)

Lawrence Metal Products Inc. • 800.441.0019 • 631.666.0300 • Fax: 631.666.0336 • www.lawrencemetal.com

e-mail: service@lawrencemetal.com • PO Box 400-M • 260 Spur Drive South, Bay Shore, New York 11706-0779 USA

step 1

step 2

step 3

step 4

step 5