georg-fischer ea05 ユーザーズマニュアル
GEORGE FISCHER …
1 9
1. General
This instruction manual contains all the information
regarding design, installation and start-up proce-
dure for the electrical actuator unit type EA 05.
regarding design, installation and start-up proce-
dure for the electrical actuator unit type EA 05.
Warnings:
≠ Do not work on this unit before disconnecting it
≠ Do not work on this unit before disconnecting it
from the mains!
≠ Electric actuators do not have a safety position.
In case of a mains breakdown the actuator
resp. the valve remains in its actual position.
resp. the valve remains in its actual position.
≠ Any work done on the actuator may only be
carried out by authorized and trained person-
nel.
nel.
≠ These products are according to the Machine
Guidelines 89/392/EWG, not regarded as
machines; they are, however, built into installa-
tions which are regarded as machines.
machines; they are, however, built into installa-
tions which are regarded as machines.
Note
We distinctly emphasize that operation is
prohibited until it has been confirmed that the
machine (plant) into which the products have
been built corresponds to the conditions of
the EC Machine Guidelines 89/392/EWG.
We distinctly emphasize that operation is
prohibited until it has been confirmed that the
machine (plant) into which the products have
been built corresponds to the conditions of
the EC Machine Guidelines 89/392/EWG.
Fi5582_1_2_4.p65
28.2.2001, 8:30 Uhr
19