dreamvision dl-500 ユーザーズマニュアル

Make sure the computer, monitor and DreamVision
DL500 are switched off.

Identify the RGB out connector on the back of your
computer (where you connect a monitor to the
computer).

Connect the computer to the DreamVision DL500
using the EVC cable and the adapter for the com-
puter you are using. See figures 3 and 4. 

If you have a desktop computer and want to display
the image on your computer monitor, connect the
cable from your monitor to the adapter. 
See figure 5 and 6.

If you want to use the remote control to control your
computer, connect the correct mouse cable from
the computer to the adapter box. See figures 7 and
8. When your computer is connected to the
DreamVision DL500 with the EVC cable (with EVC
connector on the computer), the remote mouse
control will automatically function as a regular
mouse on your PC or (MAC OPTIONAL).

If you want to use sound with your computer,
connect the stereo jack cable to the computer audio
connection and to the PC or (MAC OPTIONAL)
adapter box.

Turn on the DreamVision DL500 and the then the
computer. The computer image should now be pro-
jected from the DreamVision DL500 and the remote
control should now work as a regular mouse. If the
computer’s image is not displayed  simultaneously
on the monitor, or the mouse is not working, see
the section ‘What do I do if’. 

1183 (ELEK). LiteBeam ENG  15.10.98  14:16  Side 6