sentrol zxlcd ユーザーズマニュアル

50

Your system may be configured with two separate areas of protection.
For example, a duplex may have one system but have both halves set
up as separate areas for protection.  Or, you may have one system for
your house and a storage building with each building set up as sepa-
rate areas for protection.  See your Security Company Representative
for more details.

If you have access to both areas through a Control Station, the Control
Station will prompt you to make an area selection for Area 1, Area 2, or
both for any operation, test, or programming that is performed.  When
the Control Station is displaying the system status, it will alternate
between the Primary and the Secondary area when the Secondary area
is turned ON.

Examples:

If you press

     then enter your passcode, the Control Station will

display:

Your options are:

Press 1 for Area 1
Press 2 for Area 2
Press 3 for both areas.

If Area 1 is turned OFF and Area 2 is turned ON in the AWAY mode, the
display will alternate between the Ready display for Area 1:

and the ON display for Area 2:

ENTER 1=AREA1
 2=AREA2 3=BOTH

A1 READY TO ARM
JAN 21  05:27:52

AREA 2
ARMED AWAY

AWAY