kvh 01027702bk install ユーザーズマニュアル
2-5
Connect the Antenna Cable
Now that you have mounted the antenna to the
vehicle’s roof, connect the supplied antenna cable
(see below) to the antenna and route the cable inside
the vehicle.
vehicle’s roof, connect the supplied antenna cable
(see below) to the antenna and route the cable inside
the vehicle.
There are two options for passing the cable into the
vehicle:
vehicle:
Option 1 - Through the roof
Option 2 - Behind the hatch (SUVs and minivans)
If the gap in the vehicle’s hatch hinge is wide enough
when closed to allow the antenna cable to pass
without pinching it, maintaining a 3" bend radius,
you can insert the antenna cable through the gap and
into the vehicle. If the gap is too narrow, you will
need to use the roof drill-through option. Installers
often prefer the professional appearance of the drill-through
option.
when closed to allow the antenna cable to pass
without pinching it, maintaining a 3" bend radius,
you can insert the antenna cable through the gap and
into the vehicle. If the gap is too narrow, you will
need to use the roof drill-through option. Installers
often prefer the professional appearance of the drill-through
option.
Follow the instructions for your selected option:
Through the Roof . . . . . . . . . . . . . . . . .Page 2.17
Behind the Hatch . . . . . . . . . . . . . . . . . .Page 2.20
54-0350
2.16
TracVision A7 Installation Guide
Antenna Cable
Fitting
F-connectors
Rubber Boot