husky-liners 2510 ユーザーズマニュアル

2510.DOC

Rev: 0

01/31/01

CARE AND USE INSTRUCTIONS

     Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll

and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a

weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this

“relaxing” may take longer; moving the liner to a heated area will accelerate the process.

     Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest

way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor

All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA

4-RUNNER CARGO LINER

TO ACCESS THE FACTORY CARGO HOOK TIE
DOWN LOCATIONS IN YOUR 4-RUNNER CARGO
LINER YOU MUST FIRST MAKE A SLIT IN THE
FOUR (4) RAISED AREAS ON YOUR LINER
(SHOWN HERE DARKENED). THEN, PUSH THE
HOOK RINGS UP THROUGH THE LINER.