Carvin sx300 ユーザーズマニュアル

SAFETY INSTRUCTIONS (EUROPEAN)

The conductors in the AC power cord are colored in accordance with the following code.

GREEN & YELLOW—Earth        BLUE—Neutral         BROWN—Live

U.K. MAIN PLUG WARNING:  A molded main plug that has been cut off from the cord is
unsafe.  NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAM-
AGED OR CUT MAIN PLUG INTO A POWER SOCKET.

IMPORTANT!  FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:

WATER AND MOISTURE:  Appliance should not be used near water (near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc).  Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.

POWER SOURCES:  The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.

GROUNDING OR POLARIZATION:  Precautions should be taken so that the grounding or polar-
ization means of an appliance is not defeated.

POWER CORD PROTECTION:  Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the appliance.

SERVICING:  The user should not attempt to service the appliance beyond that described in the
operating instructions.  All other servicing should be referred to qualified service personnel.

FUSING:  If your unit is equipped with a fuse receptacle, replace only with the same type fuse.
Refer to replacement text on the unit for correct fuse type.

This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

LIMITED WARRANTY

Your Carvin amplifier is guaranteed against failure for ONE YEAR unless otherwise stated.  Carvin

will service and supply all parts at no charge to the customer providing the unit is under warranty.
Shipping costs are the responsibility of the customer.  CARVIN DOES NOT PAY FOR PARTS OR SER-
VICING OTHER THAN OUR OWN.   A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY
YOUR WARRANTY.  Carvin assumes no responsibility for horn drivers or speakers damaged by this
unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters,
accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions.
This warranty is in lieu of all other warranties, expressed or implied. No representative or person is
authorized to represent or assume for Carvin any liability in connection with the sale or servicing of
Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

When RETURNING merchandise to the factory, you may call 800-854-2235 for a return authoriza-

tion number.  Describe in writing each problem.  If your unit is out of warranty, you will be charged
the current FLAT RATE for parts and labor to bring your unit up to factory specifications. 

1)  AMP WILL NOT TURN ON

Check the power to the amp.  Check for tripped circuit breakers, unplugged extension cords or
power-strip switches that may be turned off.  

2) SX200/H AMP SHUTS OFF WHILE PLAYING

Check the rear SPK IPM switch to make sure it is set properly. Switch to the 4

Ω position if you

are unsure where to set it.  If the problem continues, contact our service technicians.

3)  NO OUTPUT with POWER LIGHT ON

Make sure that your speaker is functioning and not blown.  Check input, cables & effects 

connected to the effects loop, and extension speaker cables for defects & connections.  
a) Also verify the effects loop is working by inserting a 1/4” stereo plug into the return jack and
short the tip and ring.  If the amp works by doing this, the effects loop jack is defective.

4)  KEEP YOUR AMP LOOKING NEW

Try to keep your amplifier free from dust and moisture.  To clean, use a damp cloth to wipe the con-
trols chassis panel and wipe the vinyl covering.  Use a dry cloth to be sure the moisture is removed.

SX300R:
03-00560 7  EACH

STANDOFF W/ANTI SPIN .56X.25"

03-63294 1  EACH

STANDOFF ALUM  6-32x .25x .94

05-01603 1  EACH

PWR AC 3/16AWG 8' 2" W/PLUGS

05-62420 1  EACH

CABLE RIBBON 24A  2P/ 8" W/HDR

05-64430 1  EACH

CABLE RIBBON 24A  4P/12" W/HDR

05-68430 2  EACH

CABLE RIBBON 24A  8P/12" W/HDR

06-10001 7  EACH

PPH #4 X .875 TYPE AB BLACK

06-10045 6  EACH

SMS PFH #6X .375 TYPE AB BLACK

06-10051 4  EACH

MS PFH 6-32X .250 BLACK

06-10061 1  EACH

SMS PPH #6 X .375 TYPE A BLACK

06-10133 2  EACH

SMS PPH (#8x.375) TYPE A BLK.

06-50030 4  EACH

NUT KEP #6-32 BLACK OXIDE

06-50035 1  EACH

NUT KEP #6-32     ZINC CADMIUM

07-01603 12  EACH

KNOB "6L" 6x6x17.4mm GREY CAP

07-00105B 16  EACH

KNOB SX BLACK W/WHITE NUMBERS

07-00106 1  EACH  

KNOB SX BLACK W/WHITE

10-03301B 1  EACH  

FRONT PANEL SX300R

10-30005 1  EACH  

PANEL COVER TOPSIDE EQ/XC/XP

10-30014E 1  EACH  

CHASSIS UNIVERSAL ONE SPACE

77-03301B 1  EACH  

LABEL FRONT SX300R

77-03303B 1  EACH  

LABEL S/N OUTPUT JACKS SX300R

80-03301 1  EACH  

PCB ASSY MAIN SX300C RACK SMT PCB REV.

03-01200 1 EACH  STRAIN RELIEF .625 CHS/.35 CBL                                                                      
03-18190 1 EACH  CABLE TIE 4”LX .10”W 7/8 BNDLE                                                                     
03-21800A 2 EACH  MICA INSULATOR TO-218 0.002”                                                                       
03-44319 1 EACH  WASHER NYLON .157IDx.315Dx.197                                                                  
03-49553 2 EACH  TAPE W/ADHSVE 3M .375 X .375                                                                       
03-52221 1 EACH  GROMMET RUBBER .375” DIAMETER                                                                
03-60043 1 EACH  SIL PAD W/ADHESIVE 9 MIL                                                                              
03-77704 1 EACH  LENS METAL RED THREADED                                                                            
03-80602 4 EACH  GROMMET NAT PLASTI SCRW #8/10                                                                 
05-00111 1 EACH  CABLE SPKR 24” 16AWG QUICK CON                                                                 
05-00120 1 EACH  CABLE SPEAKER JUMPER 150MM                                                                     
05-01605 1 EACH  PWR AC 16AWG SJT 8’ W/125MM ST                                                                
05-46020 1 EACH  SPADE CONNECT 16AWG BLK  203MM                                                              

05-48025 1 EACH  SPADE CONNECT 18AWG BLK  254MM                                                              
05-64410 1 EACH  CABLE RIBBON 24A  4P/ 4” W/HDR                                                                    
05-64435 1 EACH  CABLE RIBBON 24A 4P/ 14” W/HDR
05-68415 1 EACH  CABLE RIBBON 24A 4P/ 6” W/HDR                                                                     
05-68430 1 EACH  CABLE RIBBON 24A  8P/12” W/HDR                                                                   
05-96545 1 EACH  SPADE CONNECT 16AWG GRN/YEL 5”                                                                
06-09252 15 EACH  NUT FOR POT 71-09252C                                                                                
06-10070 8 EACH  MS PPH 6-32X .500 BLACK                                                                               
06-10133 2 EACH  SMS PPH (#8x.375) TYPE A BLK.                                                                       
06-10174 4 EACH  SMS POH #10X 1.25 TYPE A BLACK                                                                   
06-11120 1 EACH  NUT METRIC 12MM KUNMING BLACK 
06-11905 6 EACH  NUT METRIC 9MM CHROME SHIMWOO                                                             
06-11906 6 EACH  WSH METRIC 9MM CHROME SHIMWOO                                                            
06-30035 4 EACH  WSH FLANGED #10 BLACK OXIDE                                                                      
06-40070 1 EACH  TERMINAL .25”TAB/.156”LUG/.032                                                                     
06-50030 8 EACH  NUT KEP #6-32 BLACK OXIDE                                                                            
06-50053 4 EACH  NUT RETAINER U-TYPE #10 SCREW                                                                   
07-00105B 16 EACH  KNOB SX BLACK W/WHITE NUMBERS                                                              
07-00106 1 EACH  KNOB SX FEATURE BLACK W/WHITE                                                                  
10-03201D1 EACH  CHASSIS SX-AMP 100W 3-CHANNEL                                                                 
10-03202C 1 EACH  COMBO HEAD
25-31350 1 EACH  SWITCH DPST ROCKER BLACK POWER                                                             
76-00001 1 EACH  WARRANTY CARD “CARVIN”                                                                             
77-03300 1 EACH  LABEL FRONT SX300C                                                                                      
77-03302 1 EACH  LABEL OUTPUT JACKS SX300C                                                                         
77-03204 1 EACH  LABEL SERIAL NUMBER SX AMPS                                                                     
80-03300 1 EACH  PCB ASSY MAIN SX300C SMT PCB                
87-20120 1 EACH  CABINET ASSY SX300C 2X12 COMBO 
87-3200     1 EACH  CABINET ASSY. HEAD