Nuance omniform filler 5.5 for designing and distributing forms ユーザーズマニュアル
Legal Notices
Copyright © 2003 by ScanSoft®, Inc. All rights reserved. No part of this publication may be
transmitted, transcribed, reproduced, stored in any retrieval system or translated into any
language or computer language in any form or by any means, mechanical, electronic,
magnetic, optical, chemical, manual, or otherwise, without prior written consent from the
Legal Department at ScanSoft, Inc., 9 Centennial Drive, Peabody, Massachusetts 01960.
Printed in the United States of America and in the Netherlands.
transmitted, transcribed, reproduced, stored in any retrieval system or translated into any
language or computer language in any form or by any means, mechanical, electronic,
magnetic, optical, chemical, manual, or otherwise, without prior written consent from the
Legal Department at ScanSoft, Inc., 9 Centennial Drive, Peabody, Massachusetts 01960.
Printed in the United States of America and in the Netherlands.
The software described in this book is furnished under license and may be used or copied
only in accordance with the terms of such license.
only in accordance with the terms of such license.
Important Notice
ScanSoft, Inc. provides this publication “as is” without warranty of any kind, either express or
implied, including but not limited to the implied warranties of merchantability or fitness for a
particular purpose. Some states or jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions; therefore, this statement may not apply to you. ScanSoft
reserves the right to revise this publication and to make changes from time to time in the
content hereof without obligation of ScanSoft to notify any person of such revision or
changes.
implied, including but not limited to the implied warranties of merchantability or fitness for a
particular purpose. Some states or jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions; therefore, this statement may not apply to you. ScanSoft
reserves the right to revise this publication and to make changes from time to time in the
content hereof without obligation of ScanSoft to notify any person of such revision or
changes.
Trademarks and Credits
OmniForm, eOmniForm.com, OmniForm Filler, Dragon NaturallySpeaking, and ScanSoft are
registered trademarks or trademarks of ScanSoft, Inc., in the United States and/or other
countries.
registered trademarks or trademarks of ScanSoft, Inc., in the United States and/or other
countries.
Microsoft Windows XP Tablet PC Edition is a registered trademark of Microsoft Corporation.
All other trademarks and tradenames mentioned herein are hereby recognized and may be
registered to their respective holders.
registered to their respective holders.
OmniForm
TM
Filler
Part Number 50-365003-00C
ScanSoft, Inc.
9 Centennial Drive
Peabody, Massachusetts
01960
9 Centennial Drive
Peabody, Massachusetts
01960
International Headquarters
Guldensporenpark 32
Building D
BE-9820 Merelbeke
Belgium
Guldensporenpark 32
Building D
BE-9820 Merelbeke
Belgium