hubbell-lighting msv-pgs-x ユーザーズマニュアル

WARNING
•

Disconnect power before installation or servicing.

•

Install, operate and maintain to meet all applicable codes.

•

If there is existing wiring, insure that it is not damaged during installation.

SHIELD INSTALLATION
1. Place shield on pole per Figure 1.
2. Mark the two locations for field drilling using the shield as a template.
3. Drill two .224 (5.7mm) dia. holes in pole wall.
4. Secure shield with two furnished 1/4-20 self-taping screws (Item 1).

´