Pentax K-S2 操作ガイド

Shooting

Press G in standby mode.

Select [AF Mode] and press E.

The [AF Mode] screen appears.

Select an autofocus mode

and press E.

The control panel reappears.

Press F.

The camera returns to standby mode.

t Memo

• The following settings for autofocus operation can be set in

the E3 menu.

In [20 Hold AF Status], you can set whether to immediately

reactivate autofocus or to maintain the focus for a certain

amount of time before reactivating autofocus when the

subject happens to move out of the selected focusing area

after being focused. The default setting is to immediately

reactivate autofocus when the subject moves out of focus.

• In S mode, [AF Mode] is fixed to x or y

depending on the selected scene mode. (p.110)

• In R mode, [AF Mode] is fixed to z.

Setting the AF Mode when Shooting

with the Viewfinder

v/A1

z
Auto-select mode

Switches automatically between

x and y modes according

to the subject.

x
Single mode

When 0 is pressed halfway and

the subject comes into focus, the

focus is locked at that position.

The AF assist light turns on as

necessary.

y
Continuous mode

The subject is kept in focus by

continuous adjustment while 0

is pressed halfway.

P appears in the viewfinder when

the subject comes into focus.

The shutter can be released even

if the subject is not in focus.

AF Mode

Cancel

17 AF.S Setting

Focus-priority, Release-priority

18 1st Frame Action

in AF.C

Release-priority, Auto, Focus-priority

19 Action in AF.C

Continuous

Focus-priority, Auto, FPS-priority

20 Hold AF Status

Off, Low, Medium, High

KS2_OPM_EN.book Page 55 Friday, February 20, 2015 12:10 PM