Pentax Optio E90 操作ガイド

6

You can save battery power by setting the display to dim automatically 
when no operation is performed for a fixed time. After the power saving 
function has been activated, the display returns to the ordinary 
brightness by pressing any of the buttons.

1

Press the 3 button in Q mode.

[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way 
controller (5) once.

2

Use the four-way controller (23) to select [Power 
Saving].

3

Press the four-way controller (5).

A pull-down menu appears.

4

Use the four-way controller (23) 
to select the time until the camera 
enters power saving mode.

Choose from [2min.], [1min.], [30sec.], 
[15sec.], [5sec.] or [Off.].

5

Press the 4 button.

The setting is saved.

• Power Saving does not function in the following situations:

- in the playback mode
- while recording a movie
- while the camera is connected to a computer
- while a menu is being displayed

• When no operation is performed after the camera is turned on, Power 

Saving is activated only after 15 seconds elapse even if [5sec.] is set.