Intel DG41TY 10-pack bundle BLKDG41TY-10PAKBUNDL ユーザーズマニュアル

 55

 

The +5 V standby line from the power supply must be capable of providing adequate 
+5 V standby current.  Failure to do so can damage the power supply.  The total 
amount of standby current required depends on the wake devices supported and 
manufacturing options.   
Additional power required will depend on configurations chosen by the integrator. 
The power supply must comply with the indicated parameters of the ATX form factor 
specification. 
•  The potential relation between 3.3 VDC and +5 VDC power rails 
•  The current capability of the +5 VSB line 
•  All timing parameters 
•  All voltage tolerances 

For example, for a system consisting of a supported 65 W processor (see Section 1.4 
on page 14 for a list of supported processors), 1 GB DDR2 RAM, one hard disk drive, 
one optical drive, and all board peripherals enabled, the minimum recommended 
power supply is 300 W. Table 28 lists the recommended power supply current values. 

3.3 V 

 

5 V 

 

12 V1 

 

12 V2 

 

-12 V 

 

5 VSB 

 

15 A 

 

15 A 

 

10 A 

 

10 A 

 

0.3 A 

 

3.0 A