Panasonic PT-DZ770E 操作ガイド
Remote control operation
ENGLISH - 41
Basic Operation
Remote control operation
Using the shutter function
If the projector is not used for a certain period of time
during the meeting intermission, for example, it is
possible to turn off the image temporarily.
button
1) Press the <SHUTTER> button on the
remote control or control panel.
▶
z
The image disappears.
2) Press the <SHUTTER> button again.
▶
z
The image is displayed.
Note
z
The power indicator <ON (G)/STANDBY (R)> will
flash slowly in green while the shutter is closed.
Using the on-screen display
function
Turn off the on-screen display function (no display)
when you do not wish the viewers to see the on-
screen display, such as the menu or the input terminal
name.
button
1) Press the <ON SCREEN> button on the
remote control.
▶
z
The on-screen display disappears.
2) Press the <ON SCREEN> button again.
▶
z
The on-screen display appears.
Note
z
If you press the <MENU> button on the control
panel for at least three seconds while the on-screen
indication is off, the on-screen display is turned on.
Switching the input signal
The input for projection can be switched.
button
Press the input selection (<RGB1>,
<RGB2>, <DVI-D>, <VIDEO>, <S-VIDEO>,
<HDMI>) buttons on the control panel or
the remote control.
<RGB1>
Switches to RGB1 input.
<RGB2>
Switches to RGB2 input.
<DVI-D>
Switches to DVI-D input.
<VIDEO> Switches to VIDEO input.
<S-VIDEO> Switches to S-VIDEO input.
<HDMI>
Switches to HDMI input.
Using the STATUS function
You can display the status of the projector.
button
Press the <STATUS> button on the remote
control.
▶
z
The
[STATUS] screen is displayed.
STATUS
SIGNAL NAME
INPUT
SIGNAL FREQUENCY
PROJECTOR RUNTIME
LAMP1
LAMP2
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
AROUND LAMP TEMP.
PROJECTOR RUNTIME
LAMP1
LAMP2
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
AROUND LAMP TEMP.
1/4
Note
z
This can also be displayed from the [PROJECTOR
SETUP] menu → [STATUS] (
page 72).