Panasonic KXTG5523E 操作ガイド

41

If the unit detects a problem, one of the following messages is shown on the display.

Base no power
or
No link. 
Reconnect AC 
adaptor.

L

The handset has lost communication with the base 
unit. Move closer to the base unit and try again.

L

Unplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.

L

The handset’s registration may have been cancelled. 
Re-register the handset (page 27).

L

The supplied telephone line cord has not been 
connected yet or not connected properly. Check the 
connections (page 10).

L

Recording was too short. Try again.

L

Phonebook copy failed (page 20). Confirm the other 
handset (the receiver) is in standby mode and try 
again.

L

The receiver’s phonebook memory is full. Erase the 
unwanted phonebook entries from the other handset 
(the receiver) and try again.

L

The phonebook memory is full. Erase unwanted 
entries (page 19).

L

Message memory is full. Erase unwanted messages 
(page 32, 33).

L

The call barred list memory is full. Erase unwanted 
entries (page 27).

L

A wrong type of battery such as Alkaline or 
Manganese was inserted. Use only the rechargeable 
Ni-MH batteries noted on page 4, 7.

L

You must subscribe to a Caller ID service. Once you 
receive caller information after subscribing to a Caller 
ID service, this message will not be displayed. 

TG5521E(e).book  Page 41  Tuesday, March 16, 2010  7:47 AM