Panasonic PT-L730NTE 操作ガイド
E
NGLISH
-21
Preparation
Connections
Notes on connections
• Read the instruction manual for each system component carefully before
connecting it.
• Turn off the power supply for all components before making any
connections.
• If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
fashion a cable to suit the component concerned.
• If there is a lot of jitter in the video signal which is input from the video
source, the picture on the screen may flicker. In such cases, it will be
necessary to connect a TBC (time base corrector).
necessary to connect a TBC (time base corrector).
• The projector has a built-in speaker. However, you will need to connect a
separate audio system to the AUDIO OUT jack if your needs specify high
sound volumes. No sound will come out of the projector’s built-in speaker
while the AUDIO OUT jack is being used.
sound volumes. No sound will come out of the projector’s built-in speaker
while the AUDIO OUT jack is being used.
• It may not be possible to connect some types of computer. Refer to the list
of compatible signals on page 59.
• The pin layout and signal names for the S-VIDEO IN connector are shown
below.
Pin No.
Signal
q
Earth (Luminance signal)
Earth (Colour signal)
Luminance signal
Colour signal
w
e
r
• The pin layout and signal names for the RGB/YP
B
P
R
(RGB1 IN/RGB2 IN)
connector are shown below.
Pin No.
Signal
q
R/P
R
G/G·SYNC/Y
B/P
B
SDA
w
e
!2
!3
HD/SYNC
!4
VD
!5
SCL
Pin o is spare.
Pins r–i, !0 and !1 are for earth.
Pins !2 and !5 functions are only valid when
supported by the computer
Pins r–i, !0 and !1 are for earth.
Pins !2 and !5 functions are only valid when
supported by the computer
q
w
e
r
External view
!1
!5
q
t
!0
y
External view