Panasonic PT-L730NTE 操作ガイド

This is used to adjust the white
areas of the picture if they appear
bluish or reddish.

(S-VIDEO/VIDEO/YP

B

P

R

only)

Press the 

button to make the

colour more vivid in tone, and press
the 

button to make the colour

more pastel in tone.

(NTSC/NTSC 4.43/YP

B

P

R

only)

This adjusts the flesh tones in the
picture. Press the 

button to

make flesh tones more greenish,
and press the 

button to make

the flesh tones more reddish.

This adjusts the darker areas (black
areas) in the picture. Press the 
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the 

button if black areas are

too light (grey rather than black).

This adjusts the contrast of the
picture. Press the 

button to

make the picture brighter, and press
the 

button to make the picture

darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)

Press the 

button to make the

picture details sharper, and press
the 

button to make the picture

details softer.

HIGH

STANDARD

LOW

(When S-VIDEO/VIDEO/YP

B

P

R

signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the 

button. To turn it off ,

set to “0” by pressing the 

button.

(S-VIDEO/VIDEO only)

AUTO1 The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.

AUTO2 The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.

NOTE:
• This should normally be set to

“AUTO1” or “AUTO2”. If the
signal is of such poor quality that
the correct format cannot be
automatically distinguished,
change the setting manually to
the required TV system.

AUTO1
NTSC
PAL
PAL-N
SECAM

AUTO2
NTSC4.43
PAL-M
PAL60