Cooler Master Cool Drive 6 LHD-V06 ユーザーズマニュアル

 

 

 

 

 

 

 

 

 

1. Up/Down 

2. Statistics Screen 

3.  Fan Speed Gauge 

4. Temperature Gauge 

5. Legend 

 

These button cycles through the Statistics Screen, allowing you to select the device you 
want monitor. If just one device is connected, then these buttons remain inert. 

This screen displays the current selected device and how long it has been running. If 
more than one device is attached to the computer, then use the Up/Down buttons to cycle 
through them to locate the one you want to monitor. 

This analog-style gauge has four needles, one for each available fan. They show how fast 
each one is spinning. The triangular divot allows you to set the alarm thresholds. If the 
fan speeds exceed this speed, the CoolDrive 6 device will notify you. You can set fan 
speeds for hard drives, CPUs, VGA cards, and anything else that uses them so long as 
you have connected them to CoolDrive 6 (described in the Hardware section). 

This sets the baseline temperature that each fan works to maintain. Anytime a connected 
fan exceeds its baseline temperature, the device’s alarm notifies you. You can set fan 
temperatures for hard drives, CPUs, VGA cards, and anything else that uses them so long 
as you have connected them to CoolDrive 6 (described in the Hardware section). 

Describes each needle’s function and settings for both of the gauges.