Panasonic KXTG6621FX 操作ガイド
Programming
31
Important:
L
L
Before registering the repeater to this base
unit, you must turn the repeater mode on.
unit, you must turn the repeater mode on.
L
Do not use more than one repeater at a
time.
time.
Setting the repeater mode
1
8(138
2
{
r}
: Select the desired setting. s M
s
{ic}
Note:
L
L
After turning the repeater mode on or off, _
is displayed on the handset momentarily.
This is normal and the handset can be used
once w is displayed.
is displayed on the handset momentarily.
This is normal and the handset can be used
once w is displayed.
Registering the DECT repeater
(KX-A405) to the base unit
(KX-A405) to the base unit
Note:
L
L
Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Proceed with the operation for your
model.
■ KX-TG6611/KX-TG6612
Proceed with the operation for your
model.
■ KX-TG6611/KX-TG6612
Press and hold {x} for about 5
seconds. (No registration tone)
seconds. (No registration tone)
■ KX-TG6621
Press and hold {x} for about 5
seconds, until the registration tone
sounds.
seconds, until the registration tone
sounds.
L
The next step must be completed
within 90 seconds.
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the & indicator and w indicator light
green.
Connect the AC adaptor, then wait until
the & indicator and w indicator light
green.
3
Base unit:
To exit the registration mode, press {x}.
L
To exit the registration mode, press {x}.
L
The registration tone stops.
(KX-TG6621)
(KX-TG6621)
TG661x_662xFX(e).book Page 31 Wednesday, March 2, 2011 2:31 PM