Panasonic NNCS894S 操作ガイド

42

43

EN

Remove the water tank and clean the 

compartment where the water tank is 

inserted.

Open the water supply cap, remove the lid 

and pipe cap and clean.

If the pipe cap is difficlult to remove, wiggle 

from side to side. When re-fitting, make sure 

that the pipe faces down (see diagram).

 

„ Notes

1.  Clean the water tank at least once a week to prevent build up of limescale.

2.  Do not use a dishwasher to clean the water tank or parts of the water tank.

Cleaning the water tank

Ensure that the rubber seal is not inside 

out when re-fitting. If the seal is not fitted 

correctly the lid will not close securely and it 

will leak.

1. Lightly twist the cover until the far side 

unclips.

2. Continue to twist until the near side 

unclips.

1. Align the slots on the cover with the holes 

on the tank.

2. Insert and push down until it clicks.

Removing the rubber seal

Removing the front cover

Re-fitting the front cover