Panasonic KX-TG9372 操作ガイド
– 6 –
Quick troubleshooting
Lift up the handset from the base unit or
charger.
Press {C} (TALK) at the handset, then
check if the display shows “Talk”.
charger.
Press {C} (TALK) at the handset, then
check if the display shows “Talk”.
Check if the telephone
cord is properly
connected to both the
base unit and
telephone line jack
on the wall.
cord is properly
connected to both the
base unit and
telephone line jack
on the wall.
Try to connect your
telephone into a
different line.
telephone into a
different line.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is
heard.
heard.
2 No dial tone is heard from handset.
Try remedy for
1 on previous
page.
1 on previous
page.
See if “Check tel line” is shown on the handset display.
Your telephone
may need service
when only back
speaker provides
a dial tone.
may need service
when only back
speaker provides
a dial tone.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to
base. Reconnect
AC adaptor.
base. Reconnect
AC adaptor.
”
is displayed.
“Talk” is
displayed.
displayed.
Displayed
Not displayed
Still displayed
Still displayed
5
No link to base.
Reconnect AC
adaptor.
Reconnect AC
adaptor.
5
Talk
KMute Ph.bookL
{C}
{s}
TG936x7x_QG(e).fm Page 6 Friday, August 8, 2008 5:00 PM