HP DL180 G6, Configure-to-order 507168-B21 ユーザーズマニュアル
製品コード
507168-B21
DIMM Type ->
Registered DIMMS (RDIMMs)
Unbuffered with ECC DIMMs
(UDIMMs)
DIMM Rank ->
Single
Rank
(1R)
Dual Rank (2R)
Quad Rank (4R)
Single
Rank
(1R)
Dual Rank (2R)
DIMM Capacity ->
4GB
2GB
4GB
8GB
16GB
4GB
16GB
1GB
2GB
4GB
DIMM Native Speed (MHz) ->
1333
1333
1333
1333
1333
1066
1066
1333
1333
1333
Voltage
LV/Std
Std
Std
LV/Std
LV/Std
Std
Std
Std
Std
Std
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)
12 slot servers
48
24
48
96
192
48
192
12
24
48
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333
1333
1333
1333
1066
1066
1333
1333
1333
2 DIMM Per Channel
1333
*
1333
*
1333
*
1333
*
1066/
1033
**
800
800
1066
1066
1066
* Supported with BIOS update via ROM Based Setup Utility (RBSU). UDIMM support is on 12-slot server.
**2DPC: LV runs at 1066, Std voltage runs at 1333
**2DPC: LV runs at 1066, Std voltage runs at 1333
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities.
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower
DIMM is on the other processor.
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz.
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels,
the maximum speed will be 1066MHz.
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz.
Maximum memory speed will also depend on the processor installed.
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities.
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower
DIMM is on the other processor.
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz.
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels,
the maximum speed will be 1066MHz.
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz.
Maximum memory speed will also depend on the processor installed.
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Memory
DA - 13248 North America — Version 53 — September 24, 2012
Page 38