Panasonic DMREZ28 操作ガイド

RQT9118

Before connection, turn off the mains for all connected equipment and read the appropriate operating
instructions.
Be sure to read the Caution for AC Mains Lead on page 3.

Adding a Satellite Receiver: Connecting to a Television and a Satellite Receiver

AV1

TV)

COMPONENT

VIDEO OUT

AV2(EXT)

AV OUT

RF IN

Rear of TV

To household
mains socket

To the aerial

To household
mains socket

Rear of satellite receiver

To household mains socket

satellite antenna

step

Rear of this unit

step

Connections other than the 21-pin Scart cable

The RF coaxial cable cannot
be used for showing pictures
from the unit. The unit must
be connected using another
method, e.g. 21-pin Scart
cable to show pictures from
the unit on the television set.

Aerial cable to the “

RF IN” on the unit.

RF coaxial cable (supplied) from the “

RF OUT” on the unit to the “RF IN” on the TV.

21-pin Scart cable (not supplied) from the “

AV1 (TV)” on the unit to the “AV” on the TV.

21-pin Scart cable (not supplied) from the “

AV” on the satellite receiver to the “AV2 (EXT)” on

the unit.

AC mains lead (supplied) from the “

AC IN~” on the unit, the TV and the satellite receiver to a

household mains socket.

After completing the above connections, proceed to the TV Tuning (

➔ 11).

To view satellite programmes
Refer to “Watching Satellite Programmes” (

➔ 16).

To record satellite programmes
Refer to “Recording from a Satellite Receiver” (

➔ 25).

Quic

k Star

t Guide

STEP 2

Using a fully wired 21-pin Scart cable

You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (

➔ 38).

You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
“AV1 Output” in the Setup menu is set to “RGB 1 (without component)” or “RGB 2 (without component)” (

➔ 55).

“AV2 Input” settings in the Setup menu (

➔ 55)

–
–

–

DMR-EZ28-EB _RQT9118-B.indb 9

2008/04/04 10:31:46