Panasonic RX-ES29 操作ガイド
RQT7914
6
Use of Batteries
≥
If this unit is not used for a long period of time or is used
only from an AC power source, remove all the batteries
to prevent potential damage due to possible battery
leakage.
only from an AC power source, remove all the batteries
to prevent potential damage due to possible battery
leakage.
≥
Align the poles (+ and –) correctly when inserting the
batteries.
batteries.
≥
Do not mix old and new batteries or different types of
batteries.
batteries.
≥
Do not recharge ordinary dry cell batteries.
≥
Do not heat or disassemble the batteries. Keep them away
from flame or water.
from flame or water.
≥
Do not keep together with metallic objects such as
necklaces.
necklaces.
≥
Do not use rechargeable type batteries.
≥
Do not use batteries if the covering has peeled off.
Mishandling of batteries can damage other items, cause
damage to the unit, and may cause a fire through
short-circuiting or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with
any part of your body.
damage to the unit, and may cause a fire through
short-circuiting or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with
any part of your body.
Power Sources
To operate the unit on AC power
(1)
[1] Use a flat head screwdriver to turn [VOLT ADJ] to
the voltage setting for your area.
[2] Connect the AC power supply cord. For areas
except Saudi Arabia and Kuwait:
Use the plug adaptor (not included) if necessary
(
Use the plug adaptor (not included) if necessary
(
1)
.
2: Household AC outlet
3: AC power supply cord (included)
3: AC power supply cord (included)
To use batteries (not included)
(2)
Disconnect the AC power supply cord from unit to operate on
battery power.
The remote control cannot turn the unit on when batteries are
used.
battery power.
The remote control cannot turn the unit on when batteries are
used.
To remove the batteries
[A]
Open the battery cover, insert a finger into the hole at the
bottom of the unit and push the batteries out.
bottom of the unit and push the batteries out.
Memory Batteries
Memory batteries retain memory (clock/timer/CD/radio
settings) during power supply interruption.
These batteries do not power the unit.
settings) during power supply interruption.
These batteries do not power the unit.
§
Memory batteries are not included.
To replace the batteries
(3)
≥
The memory batteries last for about 1 year.
≥
Connect the unit to AC power before replacing the batteries.
≥
Extend the memory battery life by always pressing
[
]
to
turn the unit off before disconnecting the unit from the AC
power source or replacing the power batteries.
power source or replacing the power batteries.
To remove the batteries
(4)
Lift the negative end of the number 4 battery to remove
batteries.
batteries.
Battery life
“
” flashes on the display when the batteries are
running down.
Then, the unit turns itself off and displays “U01”.
Replace all the batteries with new ones.
Then, the unit turns itself off and displays “U01”.
Replace all the batteries with new ones.
1
VOLT ADJ
110
–
127V
OFF
220
–
240V
VOLT ADJ
110
–
127V
OFF
220
–
240V
VOLT ADJ
110
–
127V
OFF
220
–
240V
OFF
110-127 V
220-240 V
(1)
AC IN
2
3
2
1
3
4
(3)
(R6/LR6, AA, UM-3)
(R20/LR20, D, UM-1)
5
1
2
4
3
6
8
7
(2)
[A]
outer
row
inner
row
row
(4)
1
2
4
3
GC_GCS_RQT7914-G.book 6 ページ ２００５年１月２８日 金曜日 午前９時５０分