Panasonic KX-TD816E ユーザーズマニュアル
4-140
DPT Features
U
4.2
DPT Features
Uniform Call Distribution (UCD)
Allows incoming calls (CO line, extension) to be distributed uniformly to a specific group
of extensions called an UCD group. Calls to an UCD group queue up, and the head of
the queue searches for an idle extension.
of extensions called an UCD group. Calls to an UCD group queue up, and the head of
the queue searches for an idle extension.
Conditions
• UCD can be used in the following cases:
a) The floating number* of UCD is assigned as the DIL 1:1 destination.
b) The floating number* of UCD is assigned as the Intercept Routing destination.
c) The floating number* of UCD is dialled from the extension.
d) The floating number* of UCD is dialled as the DDI destination.
• The floating number* can be assigned on a hunting group basis and UCD group is
based on the hunting group.
• UCD call can arrive at the extension in log-in mode within the UCD group, and
cannot arrive at the extensions in log-out mode.
• You can assign the log-in or log-out on the extensions.
Programming References
• System Programming — Installation Manual
[106] Station Hunting Type
Feature References
Log-In / Log-Out
* Floating Number (FN) is a virtual extension number for resources to make it appear to be an extension.
Refer to the Installation Manual.