Panasonic KX-TD816E ユーザーズマニュアル
DPT Features
4-145
4.2
DPT Features
W
To talk to the third party by holding the current call
If you hear two beeps and voice announcement;
1. Press the HOLD button.
• The current call is placed on hold.
• The INTERCOM indicator light flashes green slowly.
Conditions
• Class of Service programming determines which extensions can perform Whisper OHCA.
• The Whisper OHCA receiving extension display shows the calling extension’s number
or name for 5 seconds in 10 second intervals.
• You can select to receive a Call Waiting tone, OHCA, Whisper OHCA or none of
these at your extension.
• If the Whisper OHCA sender does not use a KX-T7400 series telephone, it will work as
OHCA. If the receiver does not use a KX-T7400 series telephone, it may not work
properly. (E.g. The announcement may be heard by the other party.)
properly. (E.g. The announcement may be heard by the other party.)
• The receiving mode may shift depending on the settings on each telephone or the
telephone type.
<Example> If the user selects 3 (Whisper OHCA mode);
– If using a KX-T7436 handset ............................Whisper OHCA
– If using a KX-T7436 SP-PHONE......................Call Waiting
– Other...................................................................Call Waiting
• It is possible to enable the Whisper OHCA by any type of telephones by system
programming. However, it may not work properly. (E.g. the announcement may be
heard by the other party.)
heard by the other party.)
• The Whisper OHCA sender will receive a ringback tone in the following cases.
– If the receiver presses the TRANSFER, CONF, SP-PHONE, DSS or CO button.
– If the party who is talking with the receiver disconnects the line or presses the
TRANSFER, CONF or HOLD button.
Programming References
• System Programming — Installation Manual
[519] Off-Hook Call Announcement (OHCA)
[990] System Additional Information, Field (69)
Feature References
Busy Station Signaling (BSS)
Call Waiting
Off-Hook Call Announcement (OHCA)
1
HOLD