Panasonic SC-PM41 操作ガイド
12
RQT8038
Cassette tape – Play and record
Recording CDs
Recording CDs
1
Insert the cassette to be recorded on.
""
Insert inside the
guides
guides
Forward side
2
Press [CD
6] and then [STOP 7, –DEMO].
3
Press [
0 OPEN/CLOSE] to insert the CD.
Press again to close.
4
Press [PLAY MODE] to select your desired mode
(refer page 7).
(refer page 7).
5
Press [
¶REC/8] to start recording.
Recording programmed tracks
Recording programmed tracks
1
Program the tracks you want (refer page 9).
2
Press [
¶REC/8] to start recording.
Other basic operations
Other basic operations
To
Action
erase a recorded
sound
sound
1) Insert the cassette to be recorded on.
2) Press [TAPE
2) Press [TAPE
3] and then [CLEAR 7].
3) Press [
¶REC/8].
stop recording
Press [CLEAR
7].
stop recording
temporarily
temporarily
1) Press [
¶REC/8].
2) Press again to resume recording.
to record on the
other side of the
tape
other side of the
tape
Turn the cassette over and press
[
[
¶REC/8].
Erasure prevention
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
recording. To record on the tape again, cover as shown.
Side A
Tab for side A
Tab for side B
To re-record
Normal tape
Normal tape
Adhesive tape
Basic play
Basic play
1
Press [OPEN
0] on top of the unit.
2
Insert a cassette.
""
Insert inside the
guides
guides
Forward side
3
Close the lid by hand.
4
Press
[
TAPE
3]
to start play.
To play the other side of the cassette, turn the cassette
over.
over.
To
Action
stop tape playback
Press [CLEAR
7].
start one touch play
Press [TAPE
3] when the system is OFF
with the cassette loaded.
fast-forward and
rewind
rewind
Press [4/REW/4] or [3/FF/¢] in the
stop mode.
stop mode.
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
TPS may not function properly with:
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
Before recording
Before recording
Preparation
Wind up the leader tape so that recording can begin
immediately.
Wind up the leader tape so that recording can begin
immediately.
• Use normal position tape.
• High position and metal position tape can be used, but this unit will
• High position and metal position tape can be used, but this unit will
not be able to record or erase them correctly.
Recording the radio
Recording the radio
1
Insert the cassette to be recorded on.
2
Tune to the required station (refer page 13).
3
Press [
¶REC/8] to start recording.
/0%.
Top of the unit
Cassette lid
PM41_8038-2P.indd 12
PM41_8038-2P.indd 12
2/22/05 5:25:13 PM
2/22/05 5:25:13 PM