Panasonic KXMB2178HK 操作ガイド

3.3.2 Using the automatic document feeder y

Open the document tray (A).

Insert the document (up to 35 sheets) FACE UP into the feeder until a single beep is heard.
R To make a portrait copy, set the original in portrait direction. To make a landscape copy, set the original in

landscape direction.

R Adjust the width of the document guides (A) to fit the actual size of the document.

Note:
R Confirm that there are no documents on the scanner glass.
R Confirm that any ink, paste or correction fluid has dried completely.
R Remove clips, staples or other fasteners.
R Do not insert the following types of documents (Make a copy of the document using the scanner glass and set the

copy instead.):
– Chemically treated paper such as carbon or carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with printing on the opposite side that can be seen through the other side, such as newsprint

R When feeding certain types of document (for example, if back of the page is not clean) through the automatic

document feeder, it is possible that dirty marks may be left on the original document. To prevent this, we
recommend feeding the document one page at a time when using the automatic document feeder, or to use the
scanner glass.

R The total height of the documents when laid flat, must be less than 5 mm. If the documents exceed the capacity

of the automatic document feeder, they may fall or cause a jam in the feeder.

R To set a document with a width of less than 210 mm, we recommend using the scanner glass to copy the original

document onto A4 or letter-size paper, then setting the copied document for better results.

R Do not set documents that do not satisfy the requirements of size and weight. Make a copy of the document using

the scanner glass and set the copy.

33