Panasonic DMC-LX100 操作ガイド

ページ / 332
20
SQW0024
Preparations
Charging battery
Always charge before first use! (battery shipped uncharged)
About batteries that you can use with this unit
It has been found that counterfeit battery packs which look very similar to the 
genuine products are made available to purchase in some markets. Some of 
these battery packs are not adequately protected with internal protection to 
meet the requirements of appropriate safety standards. There is a possibility 
that these battery packs may lead to fire or explosion. Please be advised that 
we are not liable for any accident or failure occurring as a result of use of a 
counterfeit battery pack. To ensure that safe products are used we recommend 
that a genuine Panasonic battery pack is used.
 Use the dedicated charger and battery.
1
Attach the battery paying attention to the 
direction of the battery
2
Connect the charger to the electrical outlet
 •The AC mains 
lead does not 
fit entirely into 
the AC input 
terminal. A 
gap will remain.
Plug-in type
Battery
Charger 
(model-specific)
Inlet type
Charging light 
([CHARGE])
On:  Charging in progress
Off: Charging complete
If light is flashing:
 •Battery temperature is 
too high or too low. We 
recommend charging in a 
location where the ambient 
temperature is between 10 °C 
and 30 °C (50 °F to 86 °F).
 •Battery/charger connector is 
dirty. Clean with a dry cloth.
 •Charge the battery with the charger indoors.
3
Detach the battery after charging is completed
 •The battery charger is in the standby condition when the AC power is supplied. 
The primary circuit is always “live” as long as the battery charger is connected to 
an electrical outlet.