Panasonic KX-MC6020 操作ガイド
1. Introduction and Installation
13
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
1.11 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
so that it appears on the top of each page sent.
1
{
Menu} i {#}{1}{0}{2} i {Set}
LOGO=
|
2
Enter your logo, up to 30 characters using the dial
keypad. i {Set}
keypad. i {Set}
3
Press {Menu} to exit.
1.12 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
Menu} i {#}{1}{0}{3} i {Set}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {Flash}.
L
To erase a number, press {Stop}.
3
{
Set}
4
Press {Menu} to exit.
1.13 Configuring the unit to
access the LAN
access the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
the IP address, subnet mask, and default
gateway.
1.13.1 Setting up automatically with a
DHCP server
DHCP server
Your situation:
–
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
computer, turn the power switch ON.
L
The IP address, subnet mask, and default
gateway will be set automatically.
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with.
you want to use it with.
1.14 Installing Multi-Function
Station
Station
L
Install Multi-Function Station (CD-ROM) before
connecting the unit and a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
connecting the unit and a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
L
Software features and appearance are subject to
change without notice.
change without notice.
Warning:
L
To assure continued emission limit compliance;
–
–
use only shielded USB cable (Example: Hi-
Speed USB 2.0 certified cable).
Speed USB 2.0 certified cable).
–
use only shielded LAN cable (category 5 straight
cable).
cable).
L
To protect the unit, use only shielded USB cable in
areas where thunderstorms occur.
areas where thunderstorms occur.
Note:
L
A USB cable is not supplied. Please purchase a
shielded Type-A male/Type-B male USB cable.
shielded Type-A male/Type-B male USB cable.
1
Start Windows
®
and exit all other applications.
L
For Windows 2000, Windows XP and Windows
Vista
Vista
®
users, you must be logged in as an
administrator in order to install Multi-Function
Station.
Station.
2
Insert the supplied CD-ROM into your CD-ROM
drive.
drive.
3
[
Easy Installation]
L
The installation will start automatically.
4
When the setup program starts, follow the on-screen
instructions.
instructions.
5
The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L
The [Connect Device] dialog box will appear.
2. Connect the unit and a computer with the USB cable
(
1), then click [Next].
3. Click [Install], then follow the on-screen
instructions.
L
The files will be copied to your computer.
1
MC6020-PNQW1048XB-QRG-en.book Page 13 Monday, February 2, 2009 11:26 AM