Panasonic KX-MC6020 操作ガイド
3. Help
19
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
“
REMOVE DOCUMENT”
L
The document is jammed. Remove the jammed document.
L
Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
Divide the document into two or more sheets and try again.
“
RX MEMORY FULL”
L
The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
or a recording paper jam. Install paper or remove the jammed paper.
L
If feature #442 is set to “
ALWAYS”,
–
check the connection between the computer and the unit.
–
check the computer is turned ON.
“
SCANNER POSITION ERROR”
L
There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“
SELF CALIBRATION”
L
The unit is changing the color calibration. Wait for a while.
“
TRANSMIT ERROR”
L
A transmission error occurred. Try again.
“
TONER CARTRIDGE NOT
INSTALLED”
L
The toner cartridge is not installed. Install it.
“
TRAY #2 LEFT COVER
OPEN”
L
The left cover of the optional input tray is open. Close it.
“
WASTE TONER FULL”
b
“
CHANGE SUPPLIES”
L
The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
cartridge as soon as possible.
“
WASTE TONER NOT
INSTALLED”
L
The waste toner cartridge is not installed. Install it.
“
WASTE TONER REPLACE”
b
“
CHANGE SUPPLIES”
L
The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately.
immediately.
Display
Cause & Solution
MC6020-PNQW1048ZA-QRG-en.book Page 19 Tuesday, May 20, 2008 2:09 PM