Panasonic KXFLB883FX 操作ガイド
9. Programmable Features
62
Changing the fax activation
code
{#}{
code
{#}{
4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
and program the activation code.
Important:
L
The fax activation code must be different from the code that you
programmed on the answering machine.
programmed on the answering machine.
{
0} “
OFF”
{
1} “
ON” (default)
1. {MENU} i {#}{4}{3}{4}
2. Press {1} to select “
ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L
The default code is “;
#9”.
L
Do not enter “0000”.
4. {SET} i {MENU}
Changing the silent fax
recognition ring setting
{#}{
recognition ring setting
{#}{
4}{3}{6}
To change the number of times the unit rings while in TEL/FAX mode.
{
{
3} “
3” (default)
{
4} “
4”
{
5} “
5”
{
6} “
6”
{
7} “
7”
{
8} “
8”
{
9} “
9”
Note:
L
See page 50 for details.
Setting the memory reception
alert
{#}{
alert
{#}{
4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{
memory due to some existing problem.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{
{#}{
4}{3}{8}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{
tone (slow beep).
{
0} “
OFF”: You have to press {START} for fax reception.
{
1} “
ON” (default): You do not have to press {START} for fax reception.
Setting the output tray to use
for faxing
{#}{
for faxing
{#}{
4}{4}{1}
You can select the output tray that will be used for printing received faxes.
{
{
1} “
#1”: Upper output tray (Up to approx. 100 sheets)
{
2} “
#2” (default): Lower output tray (Up to approx. 50 sheets)
Note:
L
Lists or reports printed by pressing {HELP} (page 23) or {MENU} (page 95)
will be stacked on the upper output tray.
will be stacked on the upper output tray.
Receiving a fax into the
computer
{#}{
computer
{#}{
4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
{
FAX] from Multi-Function Station.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{
2} “
CONNECTED” (default): If the unit recognizes the connection to the
computer, it will transfer a received document to the computer. If the unit cannot
recognize the connection, it will print out the data.
recognize the connection, it will print out the data.
Feature/Code
Selection
FLB883FX-PFQX2770ZA-OI-en.book Page 62 Wednesday, September 26, 2007 10:41 AM