Panasonic KX-MC6020 操作ガイド
11. Help
84
For assistance, please visit http://www.panasonic.com/help
“
REDIAL TIME OUT”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
again.
“
REMOVE DOCUMENT”
L
The document is jammed. Remove the jammed document (page 99).
L
Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
Divide the document into two or more sheets and try again.
“
RX MEMORY FULL”
L
The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 15) or remove the jammed
paper (page 94).
or a recording paper jam. Install paper (page 15) or remove the jammed
paper (page 94).
L
If feature #442 (page 63) is set to “
ALWAYS”,
–
check the connection between the computer and the unit.
–
check the computer is turned ON.
“
SCANNER POSITION ERROR”
L
There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“
SELF CALIBRATION”
L
The unit is changing the color calibration. Wait for a while.
“
TRANSMIT ERROR”
L
A transmission error occurred. Try again.
“
TONER CARTRIDGE NOT
INSTALLED”
L
The toner cartridge is not installed. Install it (page 10).
“
TRAY #2 LEFT COVER
OPEN”
L
The left cover of the optional input tray is open. Close it.
“
WASTE TONER FULL”
b
“
CHANGE SUPPLIES”
L
The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
cartridge as soon as possible.
“
WASTE TONER NOT
INSTALLED”
L
The waste toner cartridge is not installed. Install it (page 9).
“
WASTE TONER REPLACE”
b
“
CHANGE SUPPLIES”
L
The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately (page 9, 106).
immediately (page 9, 106).
Display
Cause & Solution