Panasonic CZCSWKC2 操作ガイド
4-7-2-2-7.
Transmit
Click on the
button to transmit the set content to the indoor unit.
4-7-2-2-8.
Deleting
Click on the
button to stop transmission of the setting data to the indoor unit
and close the Remote Control screen.
4-7-2-3.
On and Off operation method (Each group)
Click on the
button to display the Remote Control screen for Each Group
operation.
The basic operations are the same as for the normal Remote Control screen (for
individual indoor units), but a frame for selecting control groups is displayed on the
top of the screen.
Select the control group to operate, then transmit the settings.
The basic operations are the same as for the normal Remote Control screen (for
individual indoor units), but a frame for selecting control groups is displayed on the
top of the screen.
Select the control group to operate, then transmit the settings.
To change the control group, click on the
button on the right of the control group.
The registered control groups are displayed in the list.
Select by clicking on the group to control. Then, set the operation mode, fan speed
and other items in the same way as for normal remote control unit operation, and
click on the
and other items in the same way as for normal remote control unit operation, and
click on the
button. The settings are transmitted to all the indoor units in the
registered group.
Click on the
Click on the
button to avoid sending the settings. The remote control screen
closes.
* Use the “Maintenance” – “Register Control Group Name” screen to register
control group names.
* Use the “Maintenance” – “I/D unit master data” screen to assemble control
groups.
* It is not possible to select indoor units while the Each Group Setting screen is
displayed.
Also, if the Each Group Setting screen is displayed after an indoor unit has been
selected, Each Group setting operation takes priority.
When settings are transmitted for individual indoor
units or for groups, but no setting items are selected
on the Remote Control screen, an error message is
displayed when the
units or for groups, but no setting items are selected
on the Remote Control screen, an error message is
displayed when the
button is clicked.
Make settings on the Remote Control screen before
clicking on the
clicking on the
button.