Panasonic CZCSWKC2 操作ガイド

2

2

For outdoor units for which demand can be set (EHP units), the setting value is 
displayed as a percentage in the demand setting column. Click on the name of the 
outdoor unit to make the setting for.
The selected locations have 

 check marks in the selection column. In GHP systems, 

demand cannot be set, so the selection is unavailable.
Click again on the same location to remove the check mark, canceling the selection.
To select all selectable outdoor units, click on the 

 button in the upper left of 

the screen. The 

 button cannot be used if nothing has been selected.

It is possible to select or deselect multiple outdoor units by dragging around them 
with the mouse.
Outdoor units which are W/O connection or incapable of demand setting cannot be 
selected.

Check marks cannot be placed in the selection column for outdoor units which have 
“Protected field” displayed in the Demand column.

Selecting the outdoor unit to set, then clicking on the 

 button 

displays the Power Demand Settings screen. Click on the 

 button on the right 

of the frame in which Demand is displayed. The settable operation range list is 
displayed.

Select the operation range for the outdoor unit. The operation range differs depending 
on the outdoor unit.
A setting of 0% fully stops all air conditioners connected to the outdoor unit.
A setting of 100% means that no demand operation is possible.

*  Operation range 75% means that the outdoor units operation is demand-controlled 

in the range of 0% – 75%.