Panasonic DP-C354 操作ガイド
10
Chapter 2 Using Machine
This completes the authentication.
After completing the authentication, you can
use the selected function (copying, faxing,
scanning, or printing) .
use the selected function (copying, faxing,
scanning, or printing) .
If the authentication fails, one of the following messages may appear.
Message
Explanation
Authentication Failed
The login failed.
Check your user name, and password.
Check whether the Date and Time is set properly.
Logon Attempts Exceeded
The system has been locked because the permitted number of
logon attempts has been exceeded. Please contact the system
administrator.
Connection Failed
Unable to connect to the authentication server. Please contact
the system administrator.
Protocol Error
Unable to connect to the authentication server. Please contact
the system administrator.
Server not Found
Unable to locate the authentication server.
Check whether the DNS Domain Name is set properly
Check whether the Internet Parameters are set properly.
TCP/IP Address
TCP/IP Subnet Mask
TCP/IP Default Gateway
DNS Server Addresses
NOTE
Authentication is cancelled if no operation is performed on the machine within a certain period of
time after authentication is completed. In this case, you need to perform user authentication again
before you can use the machine. The system administrator can specify the ID Timeout Period. See
page 17 for "ID Timeout Setting", and page 19 for " Auto Reset Time Setting " details.
The system administrator can specify whether authentication is required independently for each
function (copying, faxing, scanning, and printing). See page 13 for "Authentication Setting" details.
Press
"Reset" twice to log out from the
authentication.