Panasonic th-152ux1 操作ガイド

Cannot see 3D images

•  Has the 3D Eyewear been switched On?
•  Ensure that “3D Picture Display” in “3D Settings” is set to “3D”. (see 

page 35)

•  Some 3D image signals may not be automatically recognized as 3D 

images. Set “3D Picture Format” in “3D Settings” to match the picture 
format. (see page 35)

•  Check that there are no obstacles between the infrared sensors on 

the display and the 3D Eyewear. If the 3D Eyewear stops receiving 
the infrared signal for about 5 minutes, the 3D Eyewear will be 
turned off automatically.

•  Check the available area to use the 3D Eyewear.
•  Depending on the person, the 3D images may be diffi cult to see, 

or cannot be seen, especially in users that have a different level of 
eyesight between the left and right eyes. 
Take the necessary steps (wearing glasses etc.) to correct your 
eyesight before use.

3D Eyewear is turned off automatically

•  Check that there are no obstacles between the infrared sensors on 

the display and the 3D Eyewear or that the 3D Eyewear is placed 
inside the coverage area. If the 3D Eyewear stops receiving the 
infrared signal for about 5 minutes, the 3D Eyewear will be turned off 
automatically.

There is something wrong with the 3D 
images

•  Check the setting of “3D Picture Sequence”. (see page 35)

The indicator lamp does not light when 
pressing the power button on the 3D 
Eyewear

•  The battery may be running low or fl at. Replace it.

If the picture appears to be abnormal, refer to the table below to choose the correct 3D picture format setting.

*

1

Normal*

2

*

1

Normal*

2

Normal

Normal

*1

 When the source image is not recognized correctly

*2

  When “3D Picture Display” is set to “3D”, the images will be displayed with 3D effect. When set to “2D”, displayed 

without 3D effect.

•  Depending on the player or contents, the image may be different from the above illustrations.