Cradlepoint AER2100LPE-VZ Cellular Gateway (Open Item) 仕様ガイド
©2017 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
10
Spec Sheet
/
AER2100
9/5/17
CradleCare Support available with technical support, software upgrades, and advanced hardware exchange – 1-,
3-, and 5-year options.
One-year limited hardware warranty available in the US and Canada; two-year limited hardware warranty for
integrated EU products when purchased from an authorized EU distributor – extend warranty to 2, 3, or 5 years.
3-, and 5-year options.
One-year limited hardware warranty available in the US and Canada; two-year limited hardware warranty for
integrated EU products when purchased from an authorized EU distributor – extend warranty to 2, 3, or 5 years.
SUPPORT AND WARRANTY
LEDS
INDICATOR
BEHAVIOR
POWER
The Cradlepoint AER2100 must be powered using an approved 12 V DC power
source.
•
Green = Powered ON.
•
No Light = Not receiving power. Check the power switch and the power source connection.
•
Amber = Attention. Open the administration pages and check the router status.
WAN
ETHERNET WAN Indicates status of WAN connection.
•
•
Blue = Connected to an active Ethernet WAN interface.
REMOVABLE MODEM
Indicates the status of removable modem(s).
•
Green = Modem has established an active connection.
•
Blinking Green = Modem is connecting.
•
Blinking Amber = Data connection error. No modem connection possible.
•
Blinking Red = Modem is in the process of resetting.
EC
EXTERNAL USB MODEM
Indicates the status of external USB modem.
Both internal and external USB modems have the following LED indicators:
•
Green = Modem has established an active connection.
•
Blinking Green = Modem is connecting.
•
Blinking Amber = Data connection error. No modem connection possible.
•
Blinking Red = Modem is in the process of resetting.
SIGNAL STRENGTH
Blue LED bars indicate the active modem’s signal strength (only for
integrated and removable modems).
•
•
4 Solid Bars = Strongest signal.
•
1 Blinking Bar = Weakest signal. (A blinking bar indicates half of a bar.)
WiFi BROADCAST These two LEDs indicate activity on the WiFi broadcast for both the 2.4
GHz and 5 GHz bands.
GHz and 5 GHz bands.
•
2.4 GHz
(green) = 2.4 GHz WiFi is on and operating normally.
•
5 GHz
(blue) = 5 GHz WiFi is on and operating normally.
Other
ADDITIONAL LED INDICATIONS
•
Several different LEDs blink when the factory reset button is detected.
•
Two of the modem LEDs blink red in unison for 10 seconds when there is an error
during NCOS upgrade.
during NCOS upgrade.
•
Rear power LED: Blinks amber/green when more than two modems are plugged in.
2.4GHz
5GHz