ADDER CUSBEXT100-US USB Extender 仕様ガイド

ページ / 2
The Adder C-USB modules allow you to extend the distance between a USB peripheral and your computer by 
up to 100 metres.  
The local module connects to a vacant USB port on your computer. You then connect your USB 1.1 or 2.0 
peripheral to the remote module which is linked via CAT 5, 5e or 6 cabling to the local module. A power 
adapter is provided to supply the remote module.
In operation, the C-USB modules remain transparent to allow your USB peripheral to work as expected.
C-USB cable extenders
 
Quick Start
Adder Technology Limited,
Technology House,
Trafalgar Way, Bar Hill,
Cambridge, CB23 8SQ,
United Kingdom
Tel: +44 (0)1954 780044
Fax: +44 (0)1954 780081
© 2011 Adder Technology Ltd • Release 1.0a • April 2011 • Part No. MAN-CUSBEXT100-QS  
All trademarks are acknowledged. Documentation by Corporate Text & Design (www.ctxd.com)
Adder Corporation,
350R Merrimac Street,
Newburyport,
MA 01950,
United States of America
Tel: +1-888-932-3337
Fax: +1-888-275-1117
support@adder.com
www.adder.com
Safety information
•  For use in dry, oil free indoor environments only.
•  Do not use to link between buildings.
•  Not suitable for use in hazardous or explosive 
environments or next to highly flammable materials.
•  Warning – the power adapter contains live parts.
•  No user serviceable parts are contained within the 
modules or the power adapter - do not dismantle.
•  Do not use the power adapter if the power adapter 
case becomes damaged, cracked or broken or if you 
suspect that it is not operating properly.
•  Replace the power adapter with a manufacturer 
approved type only. 
•  If you use a power extension cable with the power 
adapter, make sure the total ampere rating of the 
devices plugged into the extension cable do not exceed 
either the cable’s ampere rating or that of the wall 
outlet.
•  Ensure that all twisted pair interconnect cables are 
installed in compliance with all applicable wiring 
regulations. 
•  Do not connect the CATx link interface (RJ45 style 
connector) to any other equipment, particularly 
network or telecommunications equipment.
•  Where possible, avoid laying the twisted pair link 
cable(s) alongside power cables. 
•  The modules do not provide ground isolation and 
should not be used for any applications that require 
ground isolation or galvanic isolation.
•  For correct operation, the local and remote modules 
must have ground connections. At the computer end, 
this is achieved by ensuring that the computer that the 
module is connected to has a ground connection. At 
the device end, this can be achieved by ensuring that 
the power supply is connected to a grounded power 
outlet. 
Warranty
Adder Technology Ltd warrants that this 
product shall be free from defects in 
workmanship and materials for a period of 
two years from the date of original purchase. 
If the product should fail to operate correctly 
in normal use during the warranty period, 
Adder will replace or repair it free of charge. 
No liability can be accepted for damage due 
to misuse or circumstances outside Adder’s 
control. Also Adder will not be responsible 
for any loss, damage or injury arising directly 
or indirectly from the use of this product. 
Adder’s total liability under the terms of this 
warranty shall in all circumstances be limited 
to the replacement value of this product. If 
any difficulty is experienced in the installation 
or use of this product that you are unable to 
resolve, please contact your supplier.
Local Module
What you may additionally need
What’s in the box
Adder Asia Pacific
6 New Industrial Road, 
Hoe Huat Industrial Building
#07-01,  
Singapore 536199
Tel: +65 6288 5767
Fax: +65 6284 1150
CAT 5, 5e or 6 link 
cable, up to 100m 
in length
Remote Module
Power adapter