Panduit MPSI588T Shielded Modular Plug 仕様ガイド

www.panduit.com

Exceeds channel and component requirements of ANSI/TIA-568-C.2

Category 5e and ISO11801 Class D standards at swept frequencies

component performance:  1 to 100 MHz
Electrical/mechanical 

Meets all ODVA Ethernet/IP electrical and mechanical

performance: 

performance requirements

Environmental 

Protects and seals connections against dust and water

protection: 

immersion to ANSI/IEC 60529-2004

 

Vibration, temperature and chemical resistant; shielded version further

 

enhances electromagnetic performance

Meets ANSI/TIA-1096-A; contacts plated with 50 microinches

of gold for superior performance

Plug meets IEC 60603-7 specifications

Rated IP67 for dust protection and temporary liquid immersion

NEMA/UL compliance: 

Rated UL Type 12 to provide protection against circulating dust,

 

falling dirt, and dripping noncorrosive liquids

Connector and plug include protective cap

RoHS compliancy status: Compliant
PoE compliance: 

Meets IEEE 802.3af and IEEE 802.3at for PoE applications

Conductor 

Wire cap compatible with 22 – 26 AWG solid or stranded cable with conductor

termination range: 

insulation diameters of 0.060 in. max. and overall cable O.D. 0.200 in. to 0.330 in.

8-position, industrial connectors shall be applicable for use in manufacturing 

environments and shall meet/exceed the ANSI/TIA-568-C.2 standard for Category 

5e performance requirements. Bulkhead RJ45 jack and plug shall incorporate an 

IP67 rated seal and shall be designed to provide protection from dust and 

temporary immersion in water typically found in harsh industrial environments. 

Tethered protective cap shall ensure IP67 protection of the connector and plug in 

the unmated condition. Secondary seals on both the connector and plug shall 

provide an additional environmental barrier. Termination to a 4-pair 24 AWG 100 

ohm twisted pair cable shall not require the use of a punchdown tool. AN IP67 

rating shall be achieved when mated with an IP67 and NEMA UL Type 12 

industrial grade, bayonet style patch cord.

Bulkhead anti-rotation washer 

Eliminates the potential for module rotation

Holds bulkhead safely and securely from inside of enclosure

Plug contact plated with 50 microinches of gold

Bayonet style interface 

Provides positive reinforcement during mated condition; rated to

 

100 mating cycles

Protective cap 

Maintains IP67 seal during unmated connection

™

 

Optimizes performance by reducing conductor untwist to

Technology 

less than 1/8"

Forward motion termination 

Speeds installation and places no impact on critical components

 

for maximum reliability

Familiar to end users

No punchdown tool required 

Can terminate with standard adjustable slipjaw pliers or optional

 

termination tool (EGJT)

Universal wiring scheme 

Termination cap is color coded for T568A and T568B

 

wiring schemes

Standard mounting 

Bulkhead connector fits into optional faceplate as well as

 

standard IEC 1-13/64" (30.5mm) diameter mounting hole

IndustrialNet

™

 TX5e

™

 Connectors provide an ideal solution  

to support Industrial Ethernet from the Local Area Network 
(LAN) based support offices to the processing devices on the 
plant floor. The Bulkhead RJ45 Industrial Ethernet Connector 
is a key component to an overall Industrial Ethernet 
application. In most designs, the bulkhead connector will be 
the interface that protects the integrity of the Ethernet data 
transfer from the switch, and PLC out to the devices or up to 
the horizontal plant backbone. Typical work cells requiring the

IP67 protection, where wash down is needed. This is  
common in the food and beverage industry where bacterial 
contamination is present. The bulkhead connector also offers 
high temperature resilience, namely 85°C storage and 70°C 
operating. In manufacturing facilities such as metal 
processing, welding, and chemical batch processing, high 
temperatures are normal. Vibration is also a concern, as in 
automotive panel stamping plants and work cells. The 
IndustrialNet

™ 

TX5e

™

 Connectors protect the RJ45 mating 

even in the most severe vibration applications.

™

™

™

™

 

UTP: 

IAEBH5E

IAEBH5ES

Coupler module:  IAEBHC5E

™

™

 

UTP: 

MPI588T

MPSI588T

™

™

UTP with caps: 

IUTPCH3BL*Y

UTP without
caps: 

IUTPCHNC3BL*Y

ISTPCH1MBL**Y

ISTPCHNC1MBL**Y

™

IAEFP1

Double gang: IAEFP2-2G

IAEBH

Termination: 
tool (optional): 

EGJT

CWST

CJAST

*For lengths 5, 7, 10, 15, or 20 feet, change
the length designation in the part number to
the desired length. For example, the part
number for a 7-foot, UTP patch cord
is IUTPCH7BLY.

**For lengths 2, 3 or 5 meters, change the
length designation in the part number to the
desired length. For example, the part number
for a 5-meter, shielded patch cord
is ISTPCH5MBLY.