Panduit FLCDMCXAQY Duplex LC Module 仕様ガイド
www.panduit.com
LC OptiCam
®
Pre-Polished
Fiber Optic Connectors
S P E C I F I C A T I O N S H E E T
LC OptiCam
®
Pre-Polished Connectors
with Zirconia Ceramic Ferrules
10Gig
™
50/125μm (laser optimized)
simplex:
FLCSMCXAQY
▲
10Gig
™
50/125μm (laser optimized)
duplex:
FLCDMCXAQY
50/125μm simplex:
FLCSMC5BLY
▲
50/125μm duplex:
FLCDMC5BLY
62.5/125μm simplex: FLCSMC6BLY
▲
62.5/125μm duplex:
FLCDMC6BLY
9/125μm simplex:
FLCSSCBUY
▲
9/125μm duplex:
FLCDSCBUY
OptiCam
®
1.6/2.0mm Boots
10Gig
™
multimode
(aqua):
FMCBT2AQ-X*
Multimode (black):
FMCBT2BL-X
Singlemode (blue):
FSCBT2BU-X
OptiCam
®
3.0mm Boots
10Gig
™
multimode
(aqua):
FMCBT3AQ-X*
Multimode (black):
FMCBT3BL-X
Singlemode (blue):
FSCBT3BU-X
*X = Bag of 10 Boots; 100 per carton.
OptiCam
®
Termination Tooling
OptiCam
®
Termination Kit: FCAMKIT
OptiCam
®
Conversion Kit
(upgrades Opti-Crimp
®
Kit to also terminate
OptiCam
®
Connectors): FPPKIT-CVY
Field Polish Kit Upgrade
(upgrades Field Polish
Kit to also terminate
OptiCam
®
Connectors): FIELDKITUPG
LC cradles (2 per pkg.): FLCC
LC Fiber Optic Adapters
10Gig
™
multimode:
FADJLCAQ-L*
Multimode:
FADJLCEI-L
Singlemode:
FADJLCZBU-L
*L = Bag of 50 adapters; 100 per carton.
Mini-Com
®
LC Adapter Modules
10Gig
™
multimode: CMDJAQLC**
Multimode:
CMDJEILC**
Singlemode:
CMDJLCZBU
**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White
Opticom
®
LC Fiber Adapter Panels
6 duplex MM adapters: FAP6WEIDLC
6 duplex SM adapters: FAP6WBUDLCZ
12 duplex MM adapters: FAP12WEIDLC
12 simplex SM adapters: FAP12WBULCZ
Opti-Core ® LC Patch Cords
Duplex LC to LC:
F^E10-10M‡Y
Simplex LC to LC:
F^F10-10M‡Y
Duplex SC to LC:
F^E3-10M‡Y
Simplex SC to LC:
F^F3-10M‡Y
LC Lock-in Duplex Clip
LC lock-in duplex clip: FLCCLIW-X
▲
Add -C to simplex connector part numbers
for bulk packs of 100 connectors.
^Substitute for fiber type: 6 = 62.5/125μm OM1,
^Substitute for fiber type: 6 = 62.5/125μm OM1,
5 = 50/125μm OM2, X = 10Gig
™
50/125μm
OM3/OM4 or 9 = 9/125μm OS1/OS2.
‡Substitute for length in meters: 1, 2, 3, 5
‡Substitute for length in meters: 1, 2, 3, 5
or 10.Contact Customer Service for other
available lengths.
a p p l i c a t i o n s
LC fiber optic connectors are widely used in fiber
optic backbone and horizontal applications for
high-speed data transmission. Typical applications
for LC OptiCam
®
Connectors include maintenance
or emergency restoration of fiber networks and
retrofit/initial install in both behind-the-wall
(BTW) and in the permanent side of panelized
interconnect and cross-connect. LC OptiCam
®
Connectors eliminate the need for end face polishing
and adhesive providing easier, faster installation,
especially in remote areas and confined spaces.
The hand-held OptiCam
®
Termination Tool gives
installers the flexibility to terminate in very close
proximity to the application without having to
switch tools or find benchtop space.
t e c h n i c a l i n f o r m a t i o n
Standards requirements:
TIA/EIA-604 FOCIS-10 compatible; exceeds
TIA/EIA-568-B.3 requirements
Fiber compatibility:
62.5/125μm OM1, 50/125μm OM2, 10Gig
™
50/125μm
laser optimized OM3/OM4 and 9/125μm OS1/OS2
Fiber cable type:
900μm tight-buffered cable only
Fiber cable size:
1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots
Ferrule type:
Zirconia ceramic with a pre-polished fiber stub
Insertion loss:
Ceramic: 0.3dB average (multimode and singlemode)
Return loss:
Ceramic: >20dB (multimode), >26dB (10Gig
™
multimode),
>50dB (singlemode)
s p e c i f i c a t i o n s
LC small form factor (SFF) pre-polished connectors with rear pivot
latch shall be TIA/EIA-604 FOCIS-10 compatible and contain a
factory-terminated fiber, eliminating field polishing and adhesive. LC
pre-polished connectors shall have an average insertion loss of 0.3dB
per mated pair for multimode and singlemode fiber. LC pre-polished
connectors shall captivate fiber and buffer in one action allowing for
up to two re-terminations with no degradation in performance.
k e y f e a t u r e s a n d b e n e f i t s
LC OptiCam
®
Connectors
Factory pre-polished fiber
stub endface
Eliminates inconsistent and time-consuming field polishing to deliver
required optical performance; reduces termination time (less than
half the time of field polish connectors) and the number of
installation tools required
Dual cam design with
fiber and buffer clamps
Secures both the fiber and the buffer during the camming step to facilitate
consistent termination results; reduces the termination time compared to
conventional termination methods
Allows up to two re-terminations to achieve optimum termination
Allows up to two re-terminations to achieve optimum termination
results; reduces the number of rejected connectors and terminations
to provide yield rates approaching 100% for lower installed costs
Translucent
housing assembly
Facilitates inspection of the fiber termination quality; results in rapid
installations, improved termination yields, and lower installed costs
Non-optical disconnect
Maintains data transmission under tensile loads for jacketed cable
Mechanical cable retention Consistently provides higher than industry standard cable retention;
requires no adhesive, speeding installation
Zirconia ceramic ferrules
Provide the highest durability for repeated matings
OptiCam
®
Termination Tool
Universal termination tool
Secures both fiber and buffer in one action for all OptiCam
®
Connectors
with connector specific cradles (included); ensures fast, consistent, and
optimal terminations
Integrated visual
termination indicator (VTI)
Provide the highest durability for repeated matings