Panduit FSCMC5BL Simplex SC Module 仕様ガイド
www.panduit.com
SC OptiCam
®
Pre-Polished
Fiber Optic Connectors
S P E C I F I C A T I O N S H E E T
LC OptiCam
®
Pre-Polished Connectors
with Zirconia Ceramic Ferrules
10Gig
™
50/125μm (laser optimized)
simplex:
FSCMCXAQ^^
10Gig
™
50/125μm (laser optimized)
duplex:
FSCDMCXAQ
50/125μm simplex:
FSCMC5BL^^
50/125μm duplex:
FSCDMC5BL
62.5/125μm simplex: FSCMC6BL^^
62.5/125μm duplex:
FSCDMC6BL
9/125μm simplex:
FSCSCBU^^
SC OptiCam
®
Pre-Polished Connectors
with Composite Ferrules
50/125µm simplex: FSCMPC5BL^^
62.5/125µm simplex: FSCMPC6BL^^
OptiCam
®
1.6/2.0mm Boot Assemblies
10Gig
™
multimode
(aqua):
FMCBT2AQ-X*
Multimode (black):
FMCBT2BL-X
Singlemode (blue):
FSCBT2BU-X
OptiCam
®
3.0mm Boot Assemblies
10Gig
™
multimode
(aqua): FMCBT3AQ-X*
Multimode (black): FMCBT3BL-X
Singlemode (blue): FSCBT3BU-X
*X = Bag of 10 Boots; 100 per carton.
OptiCam
®
Termination Tooling
OptiCam
®
Termination Kit: FCAMKIT
OptiCam
®
Conversion Kit
(upgrades Opti-Crimp
®
Kit to also terminate
OptiCam
®
Connectors): FPPKIT-CVY
Field Polish Kit Upgrade
(upgrades Field Polish
Kit to also terminate
OptiCam
®
Connectors): FIELDKITUPG
SC cradles (2 per pkg.): FSCC
SC Fiber Optic Adapters
10Gig
™
multimode:
FADSCAQ-L*
Multimode:
FADSCEI-L
Singlemode:
FADSCZBU-L
*L = Bag of 50 adapters; 100 per carton.
Mini-Com
®
SC Adapter Modules
10Gig
™
multimode: CMDAQSC**
Multimode:
CMDEISC**
Singlemode:
CMSBUSCZ**
**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White
Opticom
®
SC Fiber Adapter Panels
3 duplex MM adapters: FAP3WEIDSC
3 duplex SM adapters: FAP3WBUDSCZ
6 simplex MM adapters: FAP6WEISC
6 simplex SM adapters: FAP6WBUSCZ
Opti-Core
®
SC Patch Cords
Duplex LC to LC:
F^D3-3M‡Y
Simplex LC to LC:
F^S3-3M‡Y
Duplex SC to LC:
F^D3-10M‡Y
Simplex SC to LC:
F^S3-10M‡Y
▲
Add -C to simplex connector part numbers
for bulk packs of 100 connectors.
^Substitute for fiber type: 6 = 62.5/125μm OM1,
^Substitute for fiber type: 6 = 62.5/125μm OM1,
5 = 50/125μm OM2, X = 10Gig
™
50/125μm
OM3/OM4 or 9 = 9/125μm OS1/OS2.
‡Substitute for length in meters: 1, 2, 3, 5
‡Substitute for length in meters: 1, 2, 3, 5
or 10.Contact Customer Service for other
available lengths.
a p p l i c a t i o n s
SC fiber optic connectors are widely used in
fiber optic backbone and horizontal applications
for high-speed data transmission. Typical
applications for SC OptiCam
®
Connectors
include maintenance or emergency restoration
of fiber networks and retrofit/initial install in both
behind-the-wall (BTW) and in the permanent side
of panelized interconnect and cross-connect.
SC OptiCam
®
Connectors eliminate the need for end
face polishing and adhesive providing easier, faster
installation, especially in remote areas and confined
spaces. The hand-held OptiCam
®
Termination Tool
gives installers the flexibility to terminate in very
close proximity to the application without having
to switch tools or find benchtop space.
t e c h n i c a l i n f o r m a t i o n
Standards requirements:
TIA/EIA-604 FOCIS-3 compliant; exceeds
TIA/EIA-568-B.3 requirements
Fiber compatibility:
62.5/125µm OM1, 50/125µm OM2, 10Gig
™
50/125µm laser
optimized OM3/OM4 and 9/125µm OS1/OS2
Fiber cable type:
900µm tight-buffered cable only
Fiber cable size:
1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots
Ferrule type:
Zirconia ceramic or composite ferrule with a pre-polished fiber stub
Insertion loss:
Ceramic: 0.3dB average (multimode and singlemode)
Composite: 0.3dB average (multimode)
Return loss:
Ceramic: >20dB (multimode), >26dB (10Gig
™
multimode),
>50dB (singlemode)
Composite: >20dB (multimode)
s p e c i f i c a t i o n s
SC pre-polished fiber optic connectors shall be TIA/EIA-604 FOCIS-3
compliant and contain a factory-terminated fiber, eliminating field
polishing and adhesive. SC pre-polished connectors shall have
an average insertion loss of 0.3dB per mated pair for multimode
and singlemode fiber. SC pre-polished connectors shall captivate
fiber and buffer in one action allowing for up to two re-terminations
with no degradation in performance.
k e y f e a t u r e s a n d b e n e f i t s
SC OptiCam
®
Connectors
Factory pre-polished fiber
stub endface
Eliminates inconsistent and time-consuming field polishing to deliver
required optical performance; reduces termination time (less than half the
time of field polish connectors) and the number of installation tools required
Dual cam design with
fiber and buffer clamps
Secures both the fiber and the buffer during the camming step to facilitate
consistent termination results; reduces the termination time compared to
conventional termination methods
Allows up to two re-terminations to achieve optimum termination
Allows up to two re-terminations to achieve optimum termination
results; reduces the number of rejected connectors and terminations
to provide yield rates approaching 100% for lower installed costs
Translucent
housing assembly
Facilitates inspection of the fiber termination quality; results in rapid
installations, improved termination yields, and lower installed costs
Non-optical disconnect
Maintains data transmission under tensile loads for jacketed cable
Mechanical cable retention
Consistently provides higher than industry standard cable retention;
requires no adhesive, speeding installation
Choice of Zirconia ceramic
or composite ferrules
Provides material option with comparable performance to meet
application requirements; zirconia ceramic provides the highest
durability for repeated matings
OptiCam
®
Termination Tool
Universal termination tool
Secures both fiber and buffer in one action for all OptiCam
®
Connectors with connector specific cradles (included); ensures
fast, consistent, and optimal terminations
Integrated visual
termination indicator (VTI)
Offers visual indication of proper termination after the cam step has
been completed; virtually eliminates operator error to deliver a higher
yield for a lower installed cost