Panduit FSTMCXAQ Simplex ST Module 仕様ガイド
www.panduit.com
Standards requirements:
TIA/EIA-604 FOCIS-2 compliant; exceeds
TIA/EIA-568-B.3 requirements
Fiber compatibility:
62.5/125µm OM1, 50/125µm OM2, 10Gig 50/125µm laser
optimized OM3/OM4 and 9/125µm OS1/OS2
Fiber size and type:
900µm tight-buffered fiber
250µm coated fiber, by using F250BT-C 250 micron fiber build-up
tube kit or FO6CB or FO12CB fan-out kit
Jacketed cable size:
1.6mm – 2.0mm and 3.0mm jacketed cable with optional boots
Ferrule type:
Zirconia ceramic or composite ferrule with a pre-polished fiber stub
Insertion loss:
Ceramic: 0.3dB average (multimode and singlemode)
Composite: 0.3dB average (multimode)
Return loss:
Ceramic: >20dB (multimode), >26dB (10Gig multimode),
>50dB (singlemode)
Composite: >20dB (multimode)
k e y f e a t u r e s a n d b e n e f i t s
a p p l i c a t i o n s
t e c h n i c a l i n f o r m a t i o n
s p e c i f i c a t i o n s
ST OptiCam
™
Connectors
Factory pre-polished fiber
Eliminates inconsistent and time-consuming field polishing to deliver
stub endface
required optical performance; reduces termination time (less than
half the time of field polish connectors) and the number of
installation tools required
Dual cam design with
Secures both the fiber and the buffer during the camming step to
fiber and buffer clamps
facilitate consistent termination results; reduces the termination time
compared to conventional termination methods
Allows up to two re-terminations to achieve optimum termination
results; reduces the number of rejected connectors and terminations
to provide yield rates approaching 100% for lower installed costs
Translucent
Facilitates inspection of the fiber termination quality; results in rapid
housing assembly
installations, improved termination yields, and lower installed costs
Mechanical cable retention
Consistently provides higher than industry standard cable retention;
requires no adhesive, speeding installation
Choice of zirconia ceramic
Provides material option with comparable performance to meet
or composite ferrules
application requirements; zirconia ceramic provides the highest
durability for repeated matings
OptiCam
™
Termination Tool
Universal termination tool
Secures both fiber and buffer in one action for all OptiCam
™
Connectors
with connector specific cradles (included); ensures fast, consistent, and
optimal terminations
Integrated visual
Offers visual indication of proper termination after the cam step has
termination indicator (VTI)
been completed; virtually eliminates operator error to deliver a higher
yield for a lower installed cost
ST fiber optic connectors are widely used in fiber
optic backbone and horizontal applications for
high-speed data transmission. Typical applications
for ST OptiCam
™
Connectors include maintenance
or emergency restoration of fiber networks and
retrofit/initial install in both behind-the-wall (BTW)
and in the permanent side of panelized interconnect
and cross-connect.
ST OptiCam
™
Connectors eliminate the need for end
face polishing and adhesive providing easier, faster
installation, especially in remote areas and confined
spaces. The hand-held OptiCam
™
Termination Tool
gives installers the flexibility to terminate in very
close proximity to the application without having to
switch tools or find benchtop space.
ST OptiCam
™
Pre-Polished Fiber Optic Connectors
ST pre-polished fiber optic connectors shall be TIA/EIA-604
FOCIS-2 compliant and contain a factory-terminated fiber,
eliminating field polishing and adhesive. ST pre-polished
connectors shall have an average insertion loss of 0.3dB per
mated pair for multimode and singlemode fiber. ST pre-polished
connectors shall captivate fiber and buffer in one action allowing
for up to two re-terminations with no degradation in performance.
ST OptiCam
™
Pre-Polished Connectors
with Zirconia Ceramic Ferrules
10Gig 50/125µm (laser
optimized) simplex:
optimized) simplex:
FSTMCXAQ
s
50/125µm simplex:
FSTMC5BL
s
62.5/125µm simplex:
FSTMC6BL
s
9/125µm simplex:
FSTSCBU
s
ST OptiCam
™
Pre-Polished Connectors
with Composite Ferrules
50/125µm simplex:
FSTMPC5BL
s
62.5/125µm simplex:
FSTMPC6BL
s
OptiCam
™
1.6/2.0mm Boot Assemblies
10Gig multimode (aqua): FMCBT2AQ-X*
Multimode (black):
Multimode (black):
FMCBT2BL-X
Singlemode (blue):
FSCBT2BU-X
OptiCam
™
3.0mm Boot Assemblies
10Gig multimode (aqua): FMCBT3AQ-X*
Multimode (black):
Multimode (black):
FMCBT3BL-X
Singlemode (blue):
FSCBT3BU-X
*X = Bag of 10 Boots; 100 per carton.
OptiCam
™
Termination Tooling
OptiCam
™
Termination Kit:
FCAMKIT
OptiCam
™
Conversion Kit
(upgrades Opti-Crimp
™
Kit to also terminate
OptiCam
™
Connectors): FPPKIT-CVY
Field Polish Kit Upgrade
(upgrades Field Polish
Kit to also terminate
OptiCam
™
Connectors): FIELDKITUPG
ST cradles (2 per pkg.): FSTC
Mini-Com
™
ST Adapter Modules
Multimode:
CMST**
Singlemode:
CMSTZ**
**Substitute for module color: EI = Electric Ivory,
BU = Blue, BL = Black, IW = Off White,
AW = Arctic White.
Opticom
™
ST Fiber Adapter Panels
6 simplex MM adapters: FAP6WST
6 simplex SM adapters: FAP6WSTZ
8 simplex MM adapters: FAP8WST
8 simplex SM adapters: FAP8WSTZ
6 simplex SM adapters: FAP6WSTZ
8 simplex MM adapters: FAP8WST
8 simplex SM adapters: FAP8WSTZ
Opti-Core
™
ST Patch Cords
Duplex ST to ST:
F^D2-2M‡Y
Simplex ST to ST:
F^S2-2M‡Y
Duplex ST to SC:
F^D2-3M‡Y
Simplex ST to SC:
F^S2-3M‡Y
s
Add -C to simplex connector part numbers
for bulk packs of 100 connectors.
^Substitute for fiber type: 6 = 62.5/125µm
^Substitute for fiber type: 6 = 62.5/125µm
OM1, 5 = 50/125µm OM2, X = 10Gig
50/125µm OM3/OM4 or 9 = 9/125µm
OS1/OS2.
‡Substitute for length in meters: 1, 2, 3, 5,
‡Substitute for length in meters: 1, 2, 3, 5,
or 10.
Contact Customer Service for other
Contact Customer Service for other
available lengths.
SPECIFICATION SHEET