Panduit IFC5C04BBL-CEG CAT 5e Cable 仕様ガイド
www.panduit.com
s p e c i f i c a t i o n s
Category 5e F/UTP copper cable shall meet or exceed the
IEC 61156-6 and ANSI/TIA-568-C.2 Category 5e standards
up to 60 meters. The stranded copper conductors shall be
26/7 AWG with high density polyethylene (HDPE) insulation.
The copper conductors shall be twisted in pairs. All pairs
shall then be surrounded by an overall metallic foil and
a PVC jacket. The jacket shall be oil, UV, and abrasion
resistant for enhanced chemical resistance and mechanical
performance. The jacket shall be flame retardant (CM) for
industrial Ethernet applications.
IndustrialNet
™
Category 5e F/UTP
Copper Cable
t e c h n i c a l i n f o r m a t i o n
Electrical performance:
Certified component performance up to 60 meters and exceeds
the requirements IEC 61156-6 and ANSI/TIA-568-C.2 Category
5e at swept frequencies up to 100 MHz
Standard compliances:
SUN RES OIL RES II (UL1581 Section 480 and 1200)
Conductors/insulators:
Four pairs of 26/7 AWG stranded copper insulated with high
density polyethylene (HDPE) insulation
Insulation diameter:
0.85 – 0.95mm (0.033 – 0.037 in.)
Flame rating:
CM (UL1685)
Installation tension:
110 N (25 lbf) maximum
Temperature rating:
-20°C to 75°C (-4°F to 167°F) during transport, installation,
and operation
Cable jacket:
Flame retardant PVC, oil, UV, and abrasion resistant
Cable diameter:
6.3mm (0.248 in.) nominal
Cable weight:
27 kg/305m (60 lbs. /1000 ft.)
Packaging:
Packaged 305 meters (1000 feet) on a reel
Package tested to ISTA Procedure 1A
k e y f e a t u r e s a n d b e n e f i t s
Third party tested
Cable has been tested by an independent laboratory and complies
with the electrical standard requirements of IEC 61156-6 and
ANSI/TIA-568-C.2 Category 5e standards
Reliability
Shielded F/UTP cable construction protects against environmental
elements that can cause electrical performance failures; stranded
conductors for standard flex applications and ease of installation;
cable jacket shall be oil, UV, and abrasion resistant for enhanced
chemical resistance and mechanical performance
Descending length
cable markings
Easy identification of remaining cable reduces installation time and
cable scrap
Packaged on a reel
Ensures proper performance and provides quick installation
a p p l i c a t i o n s
IndustrialNet
™
Category 5e F/UTP Copper
Cable provides reliability and high performance
as an integral component of the end-to-end
solution for industrial Ethernet and Ethernet/IP
based communications networks. The 4-pair
high performance cable ensures highest
availability in conditions seen in industrial
environments. The cable incorporates a
durable PVC jacket and is oil, UV, and abrasion
resistant.
Key applications include:
• 10BASE-T (Ethernet)
• 10BASE-T (Ethernet)
• 100BASE-T (Fast Ethernet)
• 1000BASE-T (Gigabit Ethernet)
• Industrial Ethernet
• Ethernet/IP
• Downlinks from control panel to the
machine area
• Uplinks featuring gigabit data transmission
from the control panel to the consolidation point
IndustrialNet
™
Category 5e F/UTP
Copper Cable
CM 4-pair/
color Black:
IFC5C04BBL-CEG
IndustrialNet
™
Category 6/5e
RJ45 Field Terminable Plug
Field
terminable plug: ISPS688FAS
IndustrialNet
™
Category 5e
Shielded 600 V-Rated Patch Cords
CM/CMX:
*ISTPHCH1MTL
IndustrialNet
™
M12 D-Code to
RJ45 Panel Mount Adapter
Panel
mount adapter: ICAM12DRJS
Mini-Com
®
Modular Patch Panel
8-port:
CDPP8RG
DIN Rail Adapter
1-port:
CADIN1IW**
*For other lengths, change the length designation
(1M) of the part number to the desired length
(0.3M, 0.6M, 2M, 3M, 5M, or 10M); to
designate color, replace TL (Teal) suffix with
BL (Black), RD (Red), or YL (Yellow). For
example, the part number for a 2-meter teal
patch cord is ISTPHCH2MTL.
**For standard colors other than Off White,
replace IW in part number with BL (Black),
EI (Electric Ivory), IG (International Gray), or
WH (White).
S P E C I F I C A T I O N S H E E T