Panduit IFC6C04BBL-CEG CAT 6 Cable 仕様ガイド

ページ / 2
www.panduit.com
s p e c i f i c a t i o n s
Category 6 F/UTP copper cable shall meet or exceed the 
IEC 61156-6 and ANSI/TIA-568-C.2 Category 6 standards 
up to 60 meters. The stranded copper conductors shall be  
26/7 AWG with high density polyethylene (HDPE) insulation. 
The copper conductors shall be twisted in pairs. All pairs 
shall be separated by a divider and then be surrounded by 
an overall metallic foil and a PVC jacket. The jacket shall 
be oil, UV, and abrasion resistant for enhanced chemical 
resistance and mechanical performance. The jacket shall be 
flame retardant (CM) for industrial Ethernet applications.
IndustrialNet
 Category 6 F/UTP 
Copper Cable
S P E C I F I C A T I O N   S H E E T
a p p l i c a t i o n s
t e c h n i c a l   i n f o r m a t i o n
Electrical performance: 
Certified component performance up to 60 meters and exceeds 
the requirements IEC 61156-6 Category 6 and ANSI/TIA-568-C.2 
Category 6 at swept frequencies up to 250 MHz
Standard compliances: 
SUN RES OIL RES II (UL1581 Section 480 and 1200)  
Conductors/insulators: 
Four pairs of 26/7 AWG stranded copper insulated with high 
density polyethylene (HDPE) insulation   
Insulation diameter:
0.83 – 0.93mm (0.033 – 0.037 in.)   
Flame rating:
CM (UL1685)
Installation tension: 
110 N (25 lbf) maximum
Temperature rating:
-20°C to 75°C (-4°F to 167°F) during transport, installation, 
and operation
Cable jacket:
Flame retardant PVC, oil, UV, and abrasion resistant
Cable diameter: 
6.9mm (0.272 in.) nominal
Cable weight: 
23 kg/305m (51 lbs. /1000 ft.) 
Packaging:
Packaged 305 meters (1000 feet) on a reel
Package tested to ISTA Procedure 1A 
k e y   f e a t u r e s   a n d   b e n e f i t s
Third party tested   
Cable has been tested by an independent laboratory and complies 
with the electrical standard requirements of IEC 61156-6 and 
ANSI/TIA-568-C.2 Category 6 standards
Reliability 
Shielded F/UTP cable construction protects against environmental 
elements that can cause electrical performance failures; stranded 
conductors for standard flex applications and ease of installation; 
cable jacket shall be oil, UV, and abrasion resistant for enhanced 
chemical resistance and mechanical performance  
Descending length 
cable markings
Easy identification of remaining cable reduces installation time and 
cable scrap
Packaged on a reel 
Ensures proper performance and provides quick installation  
IndustrialNet
 Category 6 F/UTP   
Copper Cable
CM 4-pair/ 
color Black:  
IFC6C04BBL-CEG   
IndustrialNet
 Category 6/5e  
RJ45 Field Terminable Plug
Field
terminable plug: ISPS688FAS 
IndustrialNet
 Category 5e 
Shielded 600 V-Rated Patch Cords
CM/CMX: 
*ISTPHCH1MTL
IndustrialNet
 M12 D-Code to 
RJ45 Panel Mount Adapter
Panel
mount adapter:   ICAM12DRJS
Mini-Com
®
 Modular Patch Panel
8-port:  
CDPP8RG
DIN Rail Adapter
1-port: 
CADIN1IW**
*For other lengths, change the length designation 
(1M) of the part number to the desired length 
(0.3M, 0.6M, 2M, 3M, 5M, or 10M); to designate 
color, replace TL (Teal) suffix with BL (Black), 
RD (Red), or YL (Yellow). For example, the 
part number for a 2-meter teal patch cord is 
ISTPHCH2MTL.
**For standard colors other than Off White, 
replace IW in part number with BL (Black),  
EI (Electric Ivory), IG (International Gray), or WH 
(White). 
IndustrialNet
 Category 6 F/UTP Copper Cable 
provides reliability and high performance as an 
integral component of the end-to-end solution 
for industrial Ethernet and Ethernet/IP based 
communications networks. The 4-pair high 
performance cable ensures highest availability 
in conditions seen in industrial environments. 
The cable incorporates a durable PVC jacket 
and is oil, UV, and abrasion resistant.
Key applications include:
• 10BASE-T (Ethernet)
• 100BASE-T (Fast Ethernet)
• 1000BASE-T (Gigabit Ethernet)
• Industrial Ethernet 
• Ethernet/IP 
• Downlinks from control panel to the 
  machine area 
• Uplinks featuring gigabit data transmission        
  from the control panel to the consolidation point